582419
53
Zoom out
Zoom in
Previous page
1/64
Next page
User’s Manual 53 / EN
Maintenance and cleaning
6.2 Cleaning the loading door and the drum
Residues of softener, detergent and dirt may accumulate in your machine in time and may cause unpleasant
odours and washing complaints. To avoid this, use the Drum Cleaning programme. If your machine is not
featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or
Extra Rinse auxiliary functions as well. Run the programme without any laundry in the machine. Before
starting the programme, put half a cup (max. 100 g) of a suitable anti-limescale powder into the main
wash detergent compartment (compartment nr. "2"). If the anti-limescale is in tablet form, put only one
tablet into compartment nr. 2. Dry the inside of the bellow with a clean piece of cloth after the programme
has come to an end.
CNOTE
¾Repeat Drum Cleaning process in every 2 months.
¾Use an anti-limescale suitable for the washing machines.
After every washing check that no foreign substance is left in the drum.
If the holes on the bellow shown in the figure is blocked, open the holes using a toothpick.
C
NOTE
¾Foreign metal substances will cause rust stains in the drum. Clean the stains on the
drum surface by using cleaning agents for stainless steel. Never use steel wool or wire
wool.
ACAUTION
¾Never use sponge or scrub materials. These will damage the painted and
plastic surfaces.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WDA 91440 W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WDA 91440 W in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info