582419

BEKO WDA 91440 W Manual

17
Zoom out
Zoom in
Previous page
1/64
Next page
User’s Manual 17 / EN
Installation
3.5 Connecting water supply
C
NOTE
¾The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1
MPa). It is necessary to have 10 – 80 litres of water flowing from the fully open tap in
one minute to have your machine run smoothly. Attach a pressure reducing valve if water
pressure is higher.
¾If you are going to use the double water-inlet product as a single (cold) water-inlet unit,
you must install the supplied blind stopper to the hot water valve before operating the
product. (Applies for the products supplied with a blind stopper group.)
A
CAUTION
¾Models with a single water inlet should not be connected to the hot water
tap. In such a case the laundry will get damaged or the product will switch
to protection mode and will not operate.
¾Do not use old or used water inlet hoses on the new product. It may cause
stains on your laundry.
1 2 3
1 Connect the special hoses supplied with the product to the water inlets on the product. Red hose (left)
(max.90ºC)isforhotwaterinlet,bluehose(right)(max.25ºC)isforcoldwaterinlet.
ACAUTION
¾Ensure that the cold and hot water connections are made correctly when
installing the product. Otherwise, your laundry will come out hot at the
end of the washing process and may damage your machine.
2 Tighten all hose nuts by hand. Never use a tool when tightening the nuts.
3 Open the taps completely after making the hose connection to check for water leaks at the connection
points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking
the seal. To prevent possible water leakages, keep the taps closed when the machine is not in use.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WDA 91440 W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WDA 91440 W in the language / languages: English as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info