796256
15
Zoom out
Zoom in
Previous page
1/171
Next page
15 / EN
Robot Vacuum / User Manual
5 Operation
Remote controlled cleaning
(Supported with the relevant mobile application only) You may direct the robot vacuum cleaner to the
area to be cleaned by using the manual remote control mode through the application.
Sleep
The robot vacuum cleaner switches to sleep mode automatically if it remains stationary for 10 minutes.
The robot vacuum cleaner switches to sleep mode automatically 10 minutes after it is completely
recharged. The sleep mode deactivates the current task.
Resetting the system
For APP account delete, the customer can press “remove the product and clear the account” button on
the APP to delete all the data on the APP and cloud like maps, clean histories, shared machine, WIFI
account password…etc.
Press “ button for 15 seconds in standby position to reset the system. When the system is reset, the
map and the original settings (including virtual limits) on the robot vacuum cleaner are deleted.
5.3.1 Operation with the application
Download the application
To download the application, search for “HomeDirect-SDA” application in the mobile app store. Review
the mobile application manual for detailed information.
Reset Wi-Fi
Press “ ” “ buttons simultaneously until you hear the aural warning and see the light blinking.
Add a device
Open the app, create a new account and follow the instructions in the application.
Before setting up the Wi-Fi, ensure that the robot vacuum cleaner and the Wi-Fi network meet the
following requirements.
A. Robot Vacuum Cleaner:
The charging level of the robot vacuum cleaner shall be over 20% or the robot vacuum cleaner shall
be placed on the charging dock.
B. Wi-Fi network:
Make sure the password of your wireless network (modem) is correct.
Do not use any VPN (Virtual private Network).
Wi-Fi router shall support, 802.11b/g/n and IPv4 protocols.
The router shall be in the 2.4GHz frequency band or a dual-band router that supports the 2.4GHz band
shall be used. The robot vacuum cleaner does not support the 5GHz frequency band.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO VRR 71214 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO VRR 71214 in the language / languages: English, French, Italian, Polish as an attachment in your email.

The manual is 40.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info