761490

BEKO VCO 42702 AD Manual

8
Zoom out
Zoom in
Previous page
1/111
Next page
8 / EN Vacuum Cleaner / User Manual
3.5 Adjusting the parquet/
carpet brush
Press the adjustment latch (10) located on the
parquet/carpet brush (11) and;
•Vacuum on firm ground and parquet; extend the
brush before vacuuming.
•Vacuum on carpets and rugs; retract the brush
before vacuuming.
3.6 Adjusting the suction
power
You can adjust the suction power of the appliance
according to the type of the surface to be cleaned.
You can turn the suction power adjustment knob
(2) found on the appliance's body clockwise to
increase the suction power. Turn the suction
power adjustment knob anti-clockwise to
decrease the suction power.
There are four settings for suction power:
•Turn the suction power adjustment knob (2)
towards the carpet icon to clean carpets.
•Turn the suction power adjustment knob
towards the eco icon to clean curtains,
tablecloths and sofas.
•Turn the suction power adjustment knob
towards the parquet icon to clean hard surfaces.
•Turn the suction power adjustment knob
towards the MAX icon to clean heavily soiled
hard surfaces and carpets.
3.7 Operation
1. Plug in the appliance after pulling the power
plug located at the back of the appliance.
A
WARNING:
Stop pulling the
appliance cable when it comes to
the yellow mark located on it. After
the yellow mark, the red mark will
come. Do not pull any more after
reaching the red mark.
2. Use the suction power adjustment knob (2)
found on the appliance to set it to the desired
suction power (see 3.6).
3. Press the on/off button (1) to switch on your
appliance.
3.8 Accessories
Accessories have been designed in one piece to
save space and provide practical use.
Upholstery tool
1. Grasp it from the dust brush area and pull it
backwards slowly.
– A click will be heard, indicating that the
button on the body has seated into its slot.
2. Attach the end of the handle or the telescopic
tube (13) to the inner side of the dust brush.
– You can now start vacuum cleaning.
3. Pull the accessory to remove it when the
process is complete.
3 Usage
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO VCO 42702 AD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO VCO 42702 AD in the language / languages: English, German, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 9,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info