EN
10
Replacing the interior light
bulb
Should the light fail to work, proceed
as follows.
1- Switch off at the socket outlet and
pull out the mains plug.
You may find it useful to remove
shelves for easy access.
2- Use a flat tipped screwdriver to
remove the light diffuser cover.
3- First check that the bulb hasn’t
worked loose by ensuring it is screwed
TFDVSFMZJOUIFIPMEFS3FQMBDFUIF
plug and switch on.
If the bulb works, replace the light
cover by inserting the rear lug and
pushing up to locate the front two
lugs.
4- If the light still fails to work, switch
off at the socket outlet and pull out
UIFNBJOTQMVH3FQMBDFUIFCVMCXJUI
a new 15 watt (max) screw cap (SES)
bulb.
5- Carefully dispose of the burnt-out
light bulb immediately.
3FQMBDFNFOUMJHIUCVMCDBOFBTJMZCF
obtained from a good local electrical or
DIY store.