Manual BEKO TSE 1262 X (page 12 of 89) (English, German, Danish, French)

556370

Zoom out

Zoom in

1/89

Installation (Under the

counter)

• Internal height of the counter should

be 820mm.

(!) Cookers or other heat sources

must not be placed above the counter

where the appliance is installed under

the counter.

• The mains wall socket plug must be

close to the right or left hand side of

the appliance.

• Remove the top cover of the

appliance. There are 4 screws(2 pieces

at the back, 2 pieces below the front

edge) that should be removed.

Fig. 1

• Cut the part shown in the picture and

then remove it by the help of pliers.

• Place you appliance under the

counter and adjust the front feets until

its top touches to the counter.

In order to use the product under the

counter, the distance between the wall

and the reference indicated in the top

connection plastic must be minimum

595 mm.

Fig. 2-3

• Fix the appliance under the counter

by using 2 of the screws that was

removed from the top cover.(Material

of the counter must be plastics or

wood based!)

Fig. 4

Adjusting the legs

If your refrigerator is unbalanced;

You can balance your refrigerator by

turning the front legs of it as illustrated

in the figure. The corner where the

leg exists is lowered when you turn

in the direction of black arrow and

raised when you turn in the opposite

direction. Taking help from someone to

slightly lift the refrigerator will facilitate

this process.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO TSE 1262 X in the language / languages: English, German, Danish, French as an attachment in your email.

The manual is 1,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO TSE 1262 X

BEKO TSE 1262 X User Manual - English - 92 pages

BEKO TSE 1262 X User Manual - Dutch, Portuguese, Swedish, Norwegian - 87 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO TSE 1262 X Manual

Product: