676950

BEKO HCA62741B Manual

16
Zoom out
Zoom in
Previous page
1/260
Next page
16 / 242 EN
Hood / User Manual
4.1 Operation
• Use high suction power if excessive vapor is
formed in kitchen. It is recommended that hob
hood suction unit is turned on 5 minutes before
beginning cooking and is left in operation during
and for 15 minutes after cooking.
4.2 Control with levels
T1 T2 T3 T4
T1. On/Off key. If the appliance is OFF, turns on
the appliance. If the appliance is at any speed
level, turns it OFF .
T2. Operates the appliance in speed levels 1, 2
and 3.
Operates the appliance in speed level 1. LED 1
lights.
Operates the appliance in speed level 2. LED 2
lights.
Operates the appliance in speed level 3. LED
3 lights.
T3. Operates the appliance at speed level 4 for 5
minutes. While the appliance is in operation
in any level (1, 2, 3) if this key is pressed then
the current speed LED will become steady
and speed level 4 LED will flash. At the end of
5 minutes, speed level 4 LED will switch OFF
and the product will exit max. speed mode. If
speed level 4 key is pressed before 5 minutes
is over, the product exits max. speed mode.
T4. Lamp On/Off key. Briefly press this key to
turn ON/OFF the lamp. Press and hold for
more than 1 second to select one of the 5
brightness levels.
4.3 Grease filter alarm
Flashing of LED 1 warns the user for cleaning the
metal filter. When this alarm is given, it is time to
clean the grease filter. Press and hold the ON/OFF
key for 3 seconds to reset the warning while the
product is in operation. LED 1 will stop flashing.
4.4 Charcoal filter alarm
The product is delivered with the charcoal filter
alarm deactivated. Press and hold keys 1 and 2 for
3 seconds to activate the charcoal filter cleaning
warning while the product is OFF. First LED 1 and
then LED 1 and 2 light up and indicate that the
warning is activated. Press and hold keys 1 and 2
for 3 seconds to deactivate the warning while the
product is OFF. First LED 1 and 2 then LED 1 light
up and indicate that the warning is deactivated.
Flashing of LED 2 warns the user for cleaning the
charcoal filter. Press and hold the ON/OFF key
for 3 seconds to reset the the warning while the
product is in operation.
C
If both metal and charcoal filter
warnings are activated simulta-
neously, resetting should be per-
formed separately for each warn-
ing.
4.5 Energy efficient usage:
• When operating the hood, adjust the speed
level according to the odour and vapour
intensity in order to prevent unnecessary
power consumption.
• Use low speeds in normal conditions (1-2), and
high speeds (3-4) when smell and vapors are
intensified.
• Lamps on the hood are intended for illuminating
the cooking zone. Using them to illuminate the
ambient/kitchen will result with unnecessary
power consumption and inadequate
illumination.
4 Operating your appliance
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO HCA62741B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO HCA62741B in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 27,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info