677671
9
Zoom out
Zoom in
Previous page
1/44
Next page
9 / 41 EN
Cooker Hood / User Manual
3 Installing your appliance
Fixing to the wall:
Drill the holes A respecting the distances indicat-
ed (Fig.2). Fix the appliance to the wall and align
it in horizontal position to the wall units. When
the appliance has been adjusted, definitely fix the
hood using the screws A (Fig.4). For the various
installations use screws and screw anchors suited
to the type of wall (e.g. reinforced concrete, plas-
terboard, etc.). If the screws and screw anchors
are provided with the product, check that they are
suitable for the type of wall on which the hood is
to be fixed.
Fixing the decorative telescopic flue:
Arrange the electrical power supply within the
dimensions of the decorative flue. If your appli-
ance is to be installed in the ducting version or
in the version with external motor, prepare the air
exhaust opening. Adjust the width of the support
bracket of the upper flue (Fig.3). Then fix it to the
ceiling using the screws A (Fig.3) in such a way
that it is in line with your hood and respecting the
distance from the ceiling indicated in Fig.2. Con-
nect the flange C to the air exhaust hole using a
connection pipe (Fig.4). Insert the upper flew into
the lower flue and rest above the frame. Extract
the upper flue up to the bracket and fix it with the
screws B (Fig.3).
To transform the hood from a ducting version into
a filtering version, ask your dealer for the charcoal
filters and follow the installation instructions.
Filtering version:
Install the hood and the two flues as described in
the paragraph for installation of the hood in duct-
ing version. To assemble the filtering flue refer to
the instructions contained in the kit. If the kit is
not provided, order it from your dealer as acces-
sory. The filters must be applied to the suction unit
positioned inside the hood. They must be centered
by turning them 90 degrees until the stop catch is
tripped (Fig.6).
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO H90X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO H90X in the language / languages: German, Dutch, French as an attachment in your email.

The manual is 6,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info