760383
31
Zoom out
Zoom in
Previous page
1/207
Next page
30 / 31 EN Refrigerator / User Manual
Troubleshooting
 The product may be set to
temperature too low. >>> Set the
temperature to a higher degree and
wait for the product to reach the
adjusted temperature.
 The cooler or freezer door washer
may be dirty, worn out, broken or
not properly settled. >>> Clean or
replace the washer. Damaged / torn
door washer will cause the product to
run for longer periods to preserve the
current temperature.
The freezer temperature is very low, but the
cooler temperature is adequate.
 The freezer compartment
temperature is set to a very low
degree. >>> Set the freezer
compartment temperature to a higher
degree and check again.
The cooler temperature is very low, but the
freezer temperature is adequate.
 The cooler compartment temperature
is set to a very low degree. >>> Set
the freezer compartment temperature
to a higher degree and check again.
The food items kept in cooler compartment
drawers are frozen.
 The cooler compartment temperature
is set to a very low degree. >>> Set
the freezer compartment temperature
to a higher degree and check again.
The temperature in the cooler or the freezer is
too high.
 The cooler compartment temperature
is set to a very high degree. >>>
Temperature setting of the cooler
compartment has an effect on
the temperature in the freezer
compartment. Wait until the
temperature of relevant parts reach
the sufficient level by changing the
temperature of cooler or freezer
compartments.
 The doors were opened frequently or
kept open for long periods. >>> Do not
open the doors too frequently.
 The door may be ajar. >>> Fully close
the door.
 The product may have been recently
plugged in or a new food item is placed
inside. >>> This is normal. The product
will take longer to reach the set
temperature when recently plugged in
or a new food item is placed inside.
 Large quantities of hot food may have
been recently placed into the product.
>>> Do not place hot food into the
product.
Shaking or noise.
 The ground is not level or durable. >>>
If the product is shaking when moved
slowly, adjust the stands to balance
the product. Also make sure the ground
is sufficiently durable to bear the
product.
 Any items placed on the product may
cause noise. >>> Remove any items
placed on the product.
The product is making noise of liquid flowing,
spraying etc.
 The product’s operating principles
involve liquid and gas flows. >>> This
is normal and not a malfunction.
There is sound of wind blowing coming from
the product.
 The product uses a fan for the cooling
process. This is normal and not a
malfunction.
There is condensation on the product’s
internal walls.
 Hot or humid weather will increase
icing and condensation. This is normal
and not a malfunction.
 The doors were opened frequently or
kept open for long periods. >>> Do not
open the doors too frequently; if open,
close the door.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO GNE60531XN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO GNE60531XN in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info