Manual BEKO GNE V422 X (page 18 of 413) (English, German, Dutch, French, Italian, Polish, Portuguese)

550182

Zoom out

Zoom in

1/413

Connection of the Water

Pipe to the Cold Water Mains

Line

(in some models)

If you want to use your refrigerator by

connecting it to the cold water mains

line,

you will have to connect a standard

1/2” valve connection fitting to the cold

water supply in your house. In case

this valve is not present or in case

you are not sure, consult a qualified

plumber.

1. Separate the union from the tap

adaptor. (Figure A)

2. Install the tap adaptor to 1/2” valve

fitting as shown in the figure. (Figure

3. After inserting the water pipe to the

union, install it to the tap adaptor

and insert to the tap as shown in the

figure. (Figure C)

4. Tighten the union manually. In case of

a leak use a spanner or a pair of pliers

to tighten the union.

A Warning: Secure the water pipe

to suitable points by means of the

pipe clips supplied to avoid any

damage or displacement or accidental

disconnection.

A Warning: After turning on the water

valve, make sure that there is no

leakage at both connection points of

the water pipe. In case of a leak, turn

off the valve immediately and tighten all

joints again using a spanner or a pair

of pliers.

A Warning: Make sure that standard

1/2" valve fitting fed by cold mains

water supply is available and is turned

off fully.

Note -1: There is no need to use water

filter in case a jug is used.

Note -2: Pump must be used when jug

will be used.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO GNE V422 X in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese as an attachment in your email.

The manual is 20,06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO GNE V422 X Manual

Product: