816727
23
Zoom out
Zoom in
Previous page
1/766
Next page
22 /36 EN Refrigerator / User Guide
Using the product
6.3 Deodoriser Module
(FreshGuard)
*May not be available in all models
The deodoriser module quickly eliminates the bad
smells in your refrigerator before they permeate the
surfaces. Thanks to this module, which is placed
on the ceiling of the fresh food compartment, the
bad odours dissolve while the air is actively being
passed on the odour filter, then the air that has been
cleaned by the filter is re-emitted to the fresh food
compartment. This way, the unwanted odours that may
emerge during the storage of foods in the refrigerator
are eliminated before they permeate the surfaces.
This is achieved thanks to the fan, LED and the odour
filter integrated into the module.
When you want to use the deodorizer module,
please activate it from the indicator button.
After achieving wireless connection with
the product, the LED on the key illuminates
continuously.
When the initial connection is established, you
may activate/deactivate the connection with a
short press on this key. Until the connection is
established, the LED on the key
blinks quickly (with the interval of 0.2 seconds).
When the connection is active, the LED shall light
up continuously.
If the connection cannot be established for a long
period, check your connection settings and refer to
the “Troubleshooting” section provided in the user
manual.
HomeWhiz application shall be used for wireless
connection. Installation steps are described on the
application during installation.
You may access the application by reading the
QR code available on the HomeWhiz label on the
product. The App is offered through App Store for
IOS devices, and through Play Store for Android
devices.
Visit https://www.homewhiz.com/ for detailed
information.
11. Freezing Compartment Temperature
Setting Key
Temperature setting is made for cooler
compartment. Pressing this key ( ) will enable
the freezer compartment temperature to be set at
-16, -17, -18, -19, -20, -21, -22 Celcius.
C
* Energy Saving (Display Off) Mode
Energy saving function is enabled automatically when
the door of the product is not opened and closed,
and all symbols other than the one selected last
amongst the water ( ), ice cube ( ) and ice particles
( ) symbols are turned off. When the energy-saving
function is active, pressing any key or opening the
door will deactivate the energy-saving function and
the display signals will return to normal. The energy-
saving function is a function activated ex-factory and
cannot be cancelled.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO GN162330XBN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO GN162330XBN in the language / languages: English, German, French as an attachment in your email.

The manual is 56.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info