758209
13
Zoom out
Zoom in
Previous page
1/23
Next page
EN
12
1. Reversing The Door
2. We recommend that you
reverse the door before switching on
for the first time.
3. Tools required: Small and
medium size flat and cross-headed
screwdrivers, a pair of pliers. Spare
Parts supplied in the plastic bag: The
following parts, which are exclusively
for left hand side fitted hinge
operation are supplied in a plastic bag
with the appliance:
4. - Door top trim hinge covers
– there are 2 different parts, one for
each side of top trim.
5. We suggest you keep all the
parts supplied in the plastic bag and
also parts, which have been removed
when reversing the door, in a safe
place for possible future, re-use.
6.
7. Important: We suggest you
ask somebody to help you when
moving the appliance around and to
hold the door when removing / re-
fitting hinges and the door to avoid
any injury and damage to the product.
8.
9. Please refer to diagrams
supplied. To follow numbers in
brackets below, refer to the main
diagram.
10. Switch off the appliance at the
socket outlet and pull out the mains
plug.
11. Remove all loose items and
fittings and food inside the appliance.
12. Gently prise off plastic hinge
covers on both sides of front top
panel using a small flat-headed
screwdriver. (1-2)
13. Unscrew the bolts of the top
hinge and remove top hinge. (3)
14. Remove door carefully off the
bottom hinge and stand door upright
in a safe place.(4)
15. Gently prise off plastic hinge
cover on door top trim. Fit the other
door top trim plastic off hinge cover
supplied in the plastic bag.(5)
16. Gently tilt the appliance back
against a strong wall on its rear side
sufficiently to allow the lower hinge
to be removed. Take care to protect
the appliance, your wall and floor
coverings. You can utilise the original
packaging to do this. Once you tilt the
appliance back, check to make sure
the appliance is completely stable and
safe before you carry on. (6)
17. Unscrew and remove the front
feet and 1 bolt. (7)
18. Unscrew and remove the
bottom hinge. (8)
19. Unscrew and remove the
bottom hinge door stopper and
bushing and reposition them on the
other side while rotating the
bushing 180°. (9)
20. Fit the bottom hinge and
tighten the screws as shown in figure.
(10)
21. Fit the other front feet as
shown in figure. (11)
22. Rotate the top hinge 180°.
Unscrew the hinge pin and re-tighten
it to the opposite side. (12)
23. Fit the top hinge on the left
hand side bushing of the door. (13)
24. Locate and re-fit door to
bottom hinge pin. (14)
25. Re-fit the upper hinge on the
opposite side by using a flat headed
screwdriver. (15)
26. Fit front top panel plastic hinge
covers on the opposite sides. (16)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO FFG1545 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO FFG1545 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info