556813
29
Zoom out
Zoom in
Previous page
1/44
Next page
29 / 44 EN
6 Quick User Guide
6.1 Preparing the machine
1. Make sure that the hoses are connected tightly.
2. Plug in your machine.
3. Turn the tap on completely.
4. Place the laundry in the machine.
5. Add detergent and fabric softener.
6.2 Programme selection
Select the programme suitable for the type,
quantity and soiling degree of the laundry
in accordance with the "Programme and
consumption table" and the temperature table
below.
6.3 Auxiliary function selection
Select the desired auxiliary functions before
starting the programme. Furthermore, you may
also select or cancel auxiliary functions that are
suitable to the running programme by pressing
the Start / Pause / Cancel button when the
machine is operating. For this, the machine must
be in a step before the auxiliary function you are
going to select or cancel.
6.4 Starting the programme
1. Press Start / Pause / Cancel button to start the
programme.
2. Start symbol showing the startup of the
programme will turn on.
3. Loading door is locked and Door Locked symbol
appears on the display.
4. The symbol of the step from which the
programme has started appears on the display
(Prewash, Main Wash, Rinse, Softener and
Spin).
6.5 End of programme
“End”appearsonthedisplayattheendofthe
programme. Symbols of the programme steps
remain lit. Auxiliary function, spin speed and
temperature that were selected at the beginning
of the programme remain selected.
6.6 Cancelling the programme
Press and hold Start / Pause / Cancel button
for 3 seconds. Start symbol flashes. Symbol of
the step at which the programme was cancelled
remainslit.Endappearsonthedisplayandthe
programme is cancelled.
6.7 Child Lock
Use Child Lock function to prevent children from
tampering with the machine. Thus you can avoid
any changes in a running programme.
C
You can switch on and off the machine
with On / Off button when the Child
Lock is active. When you switch on the
machine again, programme will resume
from where it has stopped.
To activate the Child Lock:
Press and hold 2
nd
and 4
th
Auxiliary Function
buttonsfor3seconds.“Con”appearsonthe
display.
C
Same phrase will appear on the display
if you press any button when Child Lock
is enabled.
To deactivate the Child Lock:
Press and hold 2
nd
and 4
th
Auxiliary Function
buttonsfor3seconds.“COFF”appearsonthe
display.
C
Do not forget to disable the child lock
at the end of the programme if it was
enabled before. Otherwise, machine will
not allow to select a new programme.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO ECO WMB 81445 LW at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO ECO WMB 81445 LW in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info