762689
33
Zoom out
Zoom in
Previous page
1/48
Next page
33/EN
To cancel the delay function:
When you press the Start / Hold / Cancel
key for 3 seconds while the delay function
is active, the delay process shall be
cancelled.
Starting of the program
Press the Start / Hold / Cancel key to start
your machine after selecting the program
and additional functions.
Machine softens the water as per
the hardness of the mains water. The
washing period may differ due to the water
softening process. Moreover, program
period may also change while the program
is being executed as a result of the room
temperature, mains water temperature and
the amount of dishes.
Care to avoid opening of the door while
the machine is being operated. If you need
to open the door, stop the machine by
pressing the Start / Hold / Cancel key. Then
open the door of the machine. Be careful
as steam may come out when you open
the door of the machine. Press the Start /
Hold / Cancel key again after closing the
machine door. Program shall be resumed.
To ensure that the water remaining
on the dishes and inside the machine is
completely drained and that the water
softener is removed after rinsing operation,
your machine resumes operation at drying
cycle after keeping silent for a while.
Monitoring of Program
You may monitor the current program step
of the program you have selected from the
program step monitoring indicators on the
control panel.
If the drying indicator is illuminated,
machine shall perform drying silently for
approximately 30 to 60 minutes. After this
period, the drying indicator is turned off
and End indicator shall be illuminated. The
End light is illuminated when the washing
program you have selected is complete.
Cancelling the program
1. Press the Start / Hold / Cancel key for
3 seconds to cancel the program.
2. Release the key when Washing and
Drying indicators start to flash. The
water inside the machine shall be
drained within 45 seconds. Program
shall be cancelled when the Washing
and Drying indicators are turned off
and End indicator is illuminated. Then,
you may select a new program and
start it.
Detergent or rinse aid may remain
inside the machine and/or the dishes being
washed as per the step of the program you
have cancelled.
When the Program Selection Knob
is brought to “Off” position, the washing
program is ended and machine becomes
ready for selection of program again.
Water and detergent may remain inside the
machine if the washing is ended in such a
way.
Low Salt Warning indicator
Check the low salt warning indicator to
determine if the softening salt available in
your machine is adequate. You shall add
salt to the salt compartment when the low
salt warning indicator starts to illuminate.
Setting of water hardness level is
described in the Water Softening System
section.
Low Rinse Aid Warning indicator
Check the low rinse aid warning indicator to
determine if the rinse aid available in your
machine is adequate. You shall add rinse
aid to the rinse aid compartment when the
low rinse aid warning indicator starts to
illuminate.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DVN05R20W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DVN05R20W in the language / languages: English as an attachment in your email.

The manual is 12,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DVN05R20W

BEKO DVN05R20W User Manual - German - 46 pages

BEKO DVN05R20W User Manual - Dutch - 45 pages

BEKO DVN05R20W User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info