757698
16
Zoom out
Zoom in
Previous page
1/24
Next page
16 Dryer / User Manual
6 Maintenance and cleaning A layer can build up
on the filter pores that
can cause clogging
of the filter after using
the dryer for a while.
Wash the lint filter with
warm water to remove
the layer that builds
up on the lint filter
surface. Dry the lint
filter completely before
reinstalling it.
Clean the entire inner surface of the
loading door and loading door gasket
with a soft damp cloth.
6.2 Cleaning the sensors
There are
dampness
sensors in the
dryer that detect
whether the
laundry is dry or
not.
To clean the
sensors:
Open the loading door of the dryer.
Allow the machine to cool down if it is
still hot due to the drying process.
Wipe the metal surfaces of the sensor
with a soft cloth, dampened with
vinegar and dry them.
CNOTE
Clean metal surfaces of the sensors 4
times a year.
Do not use metal tools when cleaning
metal surfaces of the sensors.
AWARNING!
Never use solvents, cleaning agents or
similar substances for cleaning due to the
risk of fire and explosion!
Service life of the product extends and
frequently faced problems decrease if cleaned
at regular intervals.
AWARNING!
Please unplug your product before
performing maintenance and cleaning
instructions. (eg control panel, body, etc.)
6.1 Lint Filter / Loading Door Inner
Surface
Lint and fiber released from the laundry to the
air during the drying cycle are collected in the
Lint Filter.
AWARNING!
Always clean the lint filter and the inner
surfaces of the loading door after each
drying process.
CNOTE
You can clean the lint filter housing with a
vacuum cleaner.
To clean the lint filter:
Open the
loading door.
Remove the
lint filter by
pulling it up
and open the
lint filter.
Clean lint, fiber, and cotton raveling by
hand or with a soft piece of cloth.
Close the lint filter and place it back into
its housing.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DTGC10000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DTGC10000 in the language / languages: English as an attachment in your email.

The manual is 2,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info