757753
31
Zoom out
Zoom in
Previous page
1/40
Next page
31/EN
Starting the programme
To start your machine after selecting the
programme and auxiliary functions, press
Start/Pause/Cancel key.
Your machine performs water softening
depending on the hardness level of the
mains water. Due to water softening
process the programme duration may
change. The programme duration can also
change while the programme is running
depending on the ambient temperature
where your machine is installed,
temperature of the supply water and
amount of the dishes.
Pay attention not to open the door of
the machine when it is running. Stop the
machine by pressing Start/Pause/Cancel
key if you have to open the door. Then,
open the door of the machine. There may
be a rush of vapour when you open the
door of your machine; be careful. Close
the door of your machine and press Start/
Pause/Cancel key again. Programme will
resume running.
After the rinsing step, the machine
will wait silent in pause mode for
some time in order to have the water
remaining in the machine and on the
dishes drained completely and to have
the water softener cleaned, and then it
will resume running in drying mode.
Programme follow-up
You can track the current step of the
selected programme on the programme
step lights located on the control panel.
If the drying light is on, the machine
will perform silent drying for 30-60 minutes.
At the end of this period, the Drying light
will go off and the End light will become on.
The End light will become on when the
selected washing programme ends.
Cancelling the programme
1. Press and hold the Start / Pause /
Cancel key for 3 seconds to cancel the
programme.
2. Release it when the Washing and
Drying lights start flashing. Water in
the machine will be discharged in 45
seconds. The programme will have
been cancelled once the Washing and
Drying lights go off and the End light
becomes on. Then, you can select and
operate a new programme.
There might be residues of detergent
or rinse aid left in the machine and/or on
the pieces being washed depending on
the step in which the programme has been
cancelled.
When you set the Programme
Selection Knob to “Off” position, the
washing programme will end and the
machine will be ready for a new programme
selection. If you end the washing cycle this
way, water and detergent may remain in the
machine.
Salt indicator
Please check the salt indicator to see
whether there is adequate amount of
softening salt in the dishwasher or not.
You need to refill the salt reservoir with salt
whenever the no-salt warning symbol lights.
Adjusting the water hardness level
is explained in Water Softening System
section.
Rinse Aid indicator
Please check the rinse aid indicator to see
whether there is adequate amount of rinse
aid in the dishwasher or not. You need to
refill the rinse aid dispenser with rinse aid
whenever the no rinse aid warning symbol
lights.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DSN05N10X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DSN05N10X in the language / languages: English as an attachment in your email.

The manual is 12,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DSN05N10X

BEKO DSN05N10X User Manual - Dutch - 42 pages

BEKO DSN05N10X User Manual - French - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info