528156
25
Zoom out
Zoom in
Previous page
1/38
Next page
24
EN
respectively, while the selected
program is running. Only the End of
Program indicator 15 c lights up when
the program is over. Remaining Time
Indicator (3) displays “0:00”.
Canceling a Program
Press Start / Pause / Cancel button (2)
for three seconds to cancel a program
that is already running. Release
the button when symbol (12) start
flashing in the display. For a couple
of minutes the machine will fulfill the
necessary operations required for
cancellation. Remaining time indicator
(11) displays “0:00”. You may select
and operate a new program following
the program cancellation process.
There might be residues of detergent
or rinse aid left in the machine and/or
on the pieces being washed depending
on the step the previous program was
in at the time of such cancellation.
Changing a Program
If you want to change running program,
first of all press Start / Pause / Cancel
button (2) to switch your machine into
pause mode. Second, switch to the
desired program by pressing Program
Selection button (4). Third, Start the
new program by pressing Start / Pause
/ Cancel button (2) again. Your new
selection will resume operation from
the step in the previous program (For
example, if the previous program was
in rinsing step, the new one will also
start from the rinsing step). If you want
to run the newly selected program from
the beginning, you have to apply the
program cancellation process first and
then select a new program.
Programming the Delayed
Start
You can delay the start of the selected
program until 9 hours. Delayed start
can not be set after the program starts.
The selected program must not be
started in order to be able to set the
delay time.
Delayed start indicator sand glass
(13) will start flashing when the
delayed start button (6) is pressed. You
can set the desired time by pressing
the delayed start button (6). Press the
Start / Pause / Cancel button (2) after
setting the time. The delayed start
indicator sand glass (13) and play
icon (12) will remain lit on the display
during the delayed start countdown
and the delay time indicator (11) will
display the remaining time. Program
will start automatically when the
countdown is over.
You can use the delayed start function
if you are utilizing the economic
electricity tariff.
If you want to change the program
or functions while the delayed start
function is enabled, then pause the
machine by pressing the Start / Pause
/ Cancel button (2). You will see that
the countdown stops. The delayed start
indicator will start flashing. Select the
new program and/or add the functions
as described in Program Selection
and Table of Average Consumption
Values. Resume the delayed start
countdown by pressing the Start /
Pause / Cancel button (2).
If you want to cancel delayed start
countdown while it is in progress,
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DSFS 6530 X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DSFS 6530 X in the language / languages: English as an attachment in your email.

The manual is 5,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DSFS 6530 X

BEKO DSFS 6530 X User Manual - Dutch - 38 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info