528154
28
Zoom out
Zoom in
Previous page
1/41
Next page
27
EN
Total time can be different from
the time indicated at the beginning
since it can change while the
program is running, depending
on the temperature of the room
where your machine is installed,
temperature of the supply water,
auto-cleaning of the water softening
system (regeneration) and amount
of the dishes.
Adding Functions to the
Program
With the help of the add function
buttons, you can run the selected
program together with the Half Load
(5) and Delayed Start (6) functions.
To add a function to the program:
1. Select the program by pressing
program selection button (4).
2. Press the button of the function
that you want to enable and check
to see a indicator for the relevant
function on the display.
3. You can start the program by
pressing the Start / Pause / Cancel
button (2).
Program Steps Follow-up
You can follow up the step while
current program is running from the
Program Steps follow up indicator (15)
a Washing Step Indicator (15 a)
b Drying Step Indicator (15 b)
c End of Program Indicator (15 c)
The display shows the steps for
washing 15 a and drying 15 b,
respectively, while the selected
program is running. Only the End of
Program indicator 15 c lights up when
the program is over. Remaining Time
Indicator (3) displays “0:00”.
Canceling a Program
Press Start / Pause / Cancel button (2)
for three seconds to cancel a program
that is already running. Release
the button when symbol (12) start
flashing in the display. For a couple
of minutes the machine will fulfill the
necessary operations required for
cancellation. Remaining time indicator
(11) displays “0:00”. You may select
and operate a new program following
the program cancellation process.
There might be residues of detergent
or rinse aid left in the machine and/or
on the pieces being washed depending
on the step the previous program was
in at the time of such cancellation.
Programming the Delayed
Start
You can delay the start of the selected
program until 9 hours. Delayed start
can not be set after the program starts.
The selected program must not be
started in order to be able to set the
delay time.
Delayed start indicator sand glass
(13) will start flashing when the
delayed start button (6) is pressed. You
can set the desired time by pressing
the delayed start button (6). Press the
Start / Pause / Cancel button (2) after
setting the time. The delayed start
indicator sand glass (13) and play
icon (12) will remain lit on the display
during the delayed start countdown
and the delay time indicator (11) will
display the remaining time. Program
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DSFN 6832 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DSFN 6832 in the language / languages: English as an attachment in your email.

The manual is 9,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DSFN 6832

BEKO DSFN 6832 User Manual - Dutch - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info