556322
25
Zoom out
Zoom in
Previous page
1/35
Next page
24
GB
To add a function to the programme:
1. Select the programme by pressing
programme selection button.
2. Press the button of the function
that you want to enable and check
to see a indicator for the relevant
function on the display.
3. You can start the programme by
pressing the Start / Pause / Cancel
button.
Programme Steps Follow-up
You can follow up the step while
current programme is running from the
Programme Steps follow up indicator
a Washing Step Indicator
b Drying Step Indicator
c End of Programme Indicator
The display shows the steps for
washing and drying, respectively, while
the selected programme is running.
Only the End of Programme indicator
lights up when the programme is over.
Remaining Time Indicator displays
“0:00”.
Cancelling a Programme
Press Start / Pause / Cancel button for
three seconds to cancel a programme
that is already running. Release the
button when symbol start flashing
in the display. For a couple of minutes
the machine will fulfill the necessary
operations required for cancellation.
Remaining time indicator displays
“0:00”. You may select and operate
a new programme following the
programme cancellation process.
There might be residues of detergent
or rinse aid left in the machine and/or
on the pieces being washed depending
on the step the previous programme
was in at the time of such cancellation.
Changing a Programme
If you want to change running
programme, first of all press Start /
Pause / Cancel button to switch your
machine into pause mode. Second,
switch to the desired programme by
pressing Programme Selection button.
Third, Start the new programme
by pressing Start / Pause / Cancel
button again. Your new selection will
resume operation from the step in the
previous programme (For example, if
the previous programme was in rinsing
step, the new one will also start from
the rinsing step). If you want to run
the newly selected programme from
the beginning, you have to apply the
programme cancellation process first
and then select a new programme.
Programming the Time Delay
You can delay the start of the selected
programme until 9 hours. Time Delay
can not be set after the programme
starts. The selected programme must
not be started in order to be able to set
the delay time.
Time Delay indicator sand glass will
start flashing when the Time Delay
button is pressed. You can set the
desired time by pressing the Time
Delay button. Press the Start / Pause
/ Cancel button after setting the time.
The Time Delay indicator sand
glass and play icon will remain lit on
the display during the delayed start
countdown and the delay time indicator
will display the remaining time.
Programme will start automatically
when the countdown is over.
You can use the Time Delay function
if you are utilizing the economic
electricity tariff.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DSFN 6830 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DSFN 6830 in the language / languages: English as an attachment in your email.

The manual is 4,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DSFN 6830

BEKO DSFN 6830 User Manual - German - 42 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info