528152
28
Zoom out
Zoom in
Previous page
1/40
Next page
27
GB
minutes the machine will fulfill the
necessary operations required for
cancellation. Remaining time indicator
(11) displays “0:00”. You may select
and operate a new program following
the delayed start countdown
cancellation process.
If you want to select a new delayed
start time while the delayed start
countdown is in progress, then pause
the machine by pressing the Start /
Pause / Cancel button (2). Set the
desired time by pressing the Delayed
Start Button (6). Start the countdown
for the new time by pressing the Start /
Pause / Cancel button (2) again.
Salt Indicator
Please check the salt indicator (9) on
the display to see whether there is
enough softening salt in your machine
or not. You need to refill the powder
dispenser whenever the salt warning
indicator light lights.
WARNING:
If the water hardness level is stored
as (r1), salt indicator will never come
on even if the salt container is empty.
(Adjusting the water hardness level is
explained in Water Softening System
section.)
Rinse Aid Indicator
Check the rinse aid warning display
(10) on the screen to find out if there
is sufficient amount of rinse aid in your
machine. You must refill the rinse aid
container when the rinse aid indicator
comes on.
WARNING:
If the Rinse Aid Indicator is set to
(OFF), rinse aid indicator will never
come on even if the rinse aid
container is empty.
Rinse Aid Indicator Setting
When your machine is switched •
off, press Half Load button (5)
and then On / Off button (1) to
switch it on.
Hold Half Load/Tablet Detergent •
button (5) pressed and release
On / Off button (1).
Keep Half Load/Tablet Detergent •
button (5) pressed for three
seconds more.
Rinse Aid Indicator (• 10) comes
on and the stored rinse aid
indicator status of your machine
appears on the display in the
format of “ON” or “OFF”.
You can change the status of the •
indicator as “ON” or “OFF” with
Start / Pause / Cancel button
(2). If you switch off the machine
with “On/Off” button (1) when the
status is “ON”, then the rinse aid
indicator will come on when the
rinse aid level in your machine
becomes low while the machine
is in use. If you switch off the
machine with “On/Off” button (1)
when the status is “OFF”, then
the rinse aid indicator will never
come on.
Starting Your Machine
Plug the mains plug into the wall •
socket.
Open the tap.•
Open the door. •
Place the dishes.•
Check if the upper and lower •
impellers rotate freely.
Put sufficient amount of •
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DSFN 6530 X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DSFN 6530 X in the language / languages: English as an attachment in your email.

The manual is 6,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DSFN 6530 X

BEKO DSFN 6530 X User Manual - Dutch - 40 pages

BEKO DSFN 6530 X User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info