Manual BEKO DSA 25030 S (page 8 of 56) (English, German, Dutch, French, Italian, Spanish)

528392

Zoom out

Zoom in

1/56

EN Instruction for use

Electrical requirements

Before inserting the plug into the wall socket

make sure that the voltage and the frequency

shown in the rating plate inside the appliance

corresponds to your electricity supply.

We recommend that this appliance is

connected to the mains supply via a suitably

switched and fused socket in a readily

accessible position.

Warning! This appliance must be earthed.

Repairs to electrical equipment should onl

y be

performed by a qualified technician. Incorrect

repairs carried out by an unqualified person

are carry risks that may have critical

consequences for the user of the appliance.

ATTENTION!

This appliance operates with R600a which is

an environmental friendly but flammable gas.

During the transportation and fixing of the

product, care must be taken not to damage

the cooling system. If the cooling system is

damaged and there is a gas leakage from the

system, keep the product away from open

flame sources and ventilate the room for a

while.

WARNING - Do not use mechanical devices

or other means to accelerate the defrosting

process, others than those recommended by

the manufacturer.

WARNING - Do not damage the refrigerant

circuit.

WARNING - Do not use electrical appliances

inside the food storage compartments of the

appliance, unless they are of the type

recommended by the manufacturer.

WARNING - If the supply cord is damaged, it

must be replaced by the manufacturer, its

service agent or similarly qualified persons in

order to avoid a hazard.

Transportation instructions

1. The appliance should be transported only in

an upright position. The packing as supplied

must be intact during transportation.

2. If during the transport the appliance, has

been positioned horizontally, it must not be

operated for at least 12 hours, to allow the

system to settle.

3. Failure to comply with the above

instructions could result in damage to the

appliance, for which the manufacturer will not

be held liable.

4. The appliance must be protected against

rain, moisture and other atmospheric

influences.

Important!

• Care must be taken while cleaning/carrying

the appliance not to touch the bottom of the

condenser metal wires at the back of the

appliance, as this could cause injury to fingers

and hands.

• Do not attempt to sit or stand on top of your

appliance as it is not designed for such use.

You could injure yourself or damage the

appliance.

• Make sure that the mains cable is not

caught under the appliance during and after

moving, as this could damage the cable.

• Do not allow children to play with the

appliance or tamper with the controls.

Installation instructions

1. Do not keep your appliance in a room

where the tempe

rature is likely to fall below 10

degrees C (50 degrees F) at night and/or

especially in winter, as it is designed to

operate in ambient temperatures between +10

and +38 degrees C (50 and 100 degrees F).

At lower temperatures the appliance may not

operate, resulting in a reduction in the storage

life of the food.

2. Do not place the appliance near cookers or

radiators or in direct sunlight, as this will

cause extra strain on the appliance's

functions. If installed next to a source of heat

or freezer, maintain the following minimum

side clearances:

From Cookers 30 mm

From Radiators 300 mm

From Freezers 25 mm

3. Make sure that sufficient room is provided

around the appliance to ensure free air

circulation (Item 2).

• Put the back airing lid to the back of your

refrigerator to set the distance between the

refrigerator and the wall (Item 3).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DSA 25030 S in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO DSA 25030 S Manual

Product: