582397
53
Zoom out
Zoom in
Previous page
1/64
Next page
53 / 64 EN
Dryer / User Manual
Operating the product
5.8 Auxiliary function selection
Audio warning
Machine will give an audio warning when the
programme is completed. If you do not want
the machine to give an audio warning, press
the Volume button repeatedly until an "x" sign
appears on the display. Use the same button to
adjust the volume.
C
You can activate this function either before
or after the programme starts.
Cancel
audio warning
Audio warning
level 1
Audio warning
level 2
Audio warning
level 3
Dryness level
Used to adjust the required dryness level. More
drying is performed compared to default settings
when "+" sign appears and less drying is
performed when "-" sign appears. Programme
duration can vary depending on selection.
C
You can activate this function only before
the programme has started.
Anti-creasing
You can use Anti-creasing function to prevent
laundry from creasing if you will not immediately
take the laundry out after the program has come
to an end. This function rotates the laundry every
240 seconds for 2 hours to prevent creasing.
In the first display image below, anti-creasing is
activated but programme is still running. Drying
cycle is completed and Anti-creasing step has
started in the second display image.
C
Press Anti-creasing button to activate
this function.
Changing the contrast
You can adjust display contrast in order to make
the symbols on the display clearer. It may be
necessary to change the contrast setting of the
display especially when the dryer is installed on
the washing machine.
Press and hold the Cycle / Time button for 3
seconds.
When contrast is changed, all symbols on display
will appear for 3 seconds in order to indicate that
the process is completed.
C
Perform the same procedure to revert back
to the previous contrast setting.
5.9 Warning symbols
C
Warning symbols may vary according to
the model of your machine.
Lint filter cleaning
When the programme is completed, a warning
symbol will appear to remind that the filter needs
to be cleaned.
C
If the Filter Cleaning symbol flashes
continuously, refer to “Troubleshooting”
section.
Water tank
When the programme is completed, a warning
symbol will appear to remind that the water tank
needs to be drained.
If the water tank becomes full while the
programme is running, warning symbol will
start to flash and the machine will switch to
standby. Drain the water in the water tank and
press Start / Pause / Cancel button to resume
the programme. Warning symbol turns off and
programme resumes operating.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DPU 8306 GXE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DPU 8306 GXE in the language / languages: English, German as an attachment in your email.

The manual is 5,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info