582398
45
Zoom out
Zoom in
Previous page
1/52
Next page
45
EN
Iron Dry
Starts to illuminate when the dryness level reach
Iron Dry step.
Cupboard Dry
Starts to illuminate when the dryness level reach
Cupboard Dry step.
Extra dry
Starts to illuminate when the dryness level reach
Wardrobe Dry Extra step.
Ventilation
Ventilation symbol illuminates when the
programme comes to an end.
C
Anti-creasing symbol will illuminate at the end
of the programme if Anti-creasing function is
activated.
Child-proof Lock
Machine is equipped with a Childproof Lock which
prevents interfering with the current programme
flow by pressing any button. All buttons except
the On / Off button on the control panel are
deactivated when the Child-proof Lock is active.
In order to activate the Childproof Lock, press
Audio Warning and Anti-Creasing buttons
simultaneously for 3 seconds.
To start a new programme after the current
programme is over or to interrupt the current
programme, the Child-proof Lock should be
deactivated. Press the same buttons for 3 seconds
again to deactivate the Child-proof Lock.
C
Lock symbol will appear on the display when
the Child-proof Lock is activated.
C
Child-proof Lock is deactivated when the
machine is switched off and on with On / Off
button.
When the Child-proof Lock is activated:
Display symbols will not change even if the
position of Programme Selection knob is
changed while the machine is running or in
halt.
If the Child-proof Lock is deactivated after
changing the position of the Programme
Selection knob while the machine is running,
the machine stops and new programme
information is displayed.
Changing the programme after it has
started
After the machine starts, you can change the
selected programme and dry your laundry in a
different programme.
1. If you want to select Extra Dry programme
instead of Iron Dry programme, press and
hold the Start / Pause / Cancel button for 3
seconds to cancel the programme.
2. Select Extra Dry programme by turning the
Programme Selection knob.
3. Press Start / Pause / Cancel button to start
the programme.
C
You can also select a new programme by
turning the Programme Selection knob
while the machine is operating. In this case,
current programme is aborted and the new
programme information appears on the
display.
Adding / removing laundry in Pause mode
In order to add or take out laundry after the drying
programme has started:
1. Press Start / Pause / Cancel button to switch
the machine to Pause mode. Drying process
will stop.
2. While in Pause mode, open the loading door,
add or take out laundry and close the loading
door.
3. Press Start / Pause / Cancel button to start
the programme.
C
Any laundry added after the drying process
has started may cause the clothes that are
already dried in the machine intermingle with
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DPU 8305 XEL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DPU 8305 XEL in the language / languages: English, German as an attachment in your email.

The manual is 5,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info