576111
43
Zoom out
Zoom in
Previous page
1/64
Next page
Dryer / User Manual 43 / EN
3 Installaton
Refer to the nearest Authorized Service
Agent for installation of the product. To
make the product ready for use, make sure
that the electricity and water drainage
system are appropriate before calling the
Authorized Service Agent. If they are not, call
a qualified technician and plumber to have
any necessary arrangements carried out.
C
Preparation of the product’s
location as well as the electrical and
waste water installations is under
customer’s responsibility.
B
Installation and electrical
connections of the product must
be carried out by the Authorized
Service Agent. Manufacturer shall
not be held liable for damages that
may arise from procedures carried
out by unauthorized persons.
A
Prior to installation, visually check
if the product has any defects on
it. If so, do not have it installed.
Damaged products cause risks for
your safety.
A
Let your dryer wait for 12 hours
before starting to use it.
3.1 Appropriate installation
location
Install the product on a stable and level
surface.
Dryer is heavy. Do not move it by
yourself.
Operate your product in a well ventilated,
dust-free environment.
Do not block the air ducts in front of and
under the product with materials such as
long pile rugs, wooden blocks and bands.
Do not install the product behind a door
with a lock, sliding door or a hinged door
which can strike the product.
Once the product is installed, it should
stay at the same place where its
connections have been made. When
installing the product, make sure
that the rear wall of it does not touch
anywhere (tap, socket, etc.). Also
pay attention to select an installation
location which you will not be required to
change afterwards.
Place the product at least 1.5 cm away
from the edges of other furniture.
The rear surface of the tumble dryer
shall be placed against a wall
B
Do not place the product on the
power cable.
3.2 Removing the
transportation safety
assembly
A
Remove the transportation
safety assembly before using the
product for the first time.
1. Open the loadng door.
2. There s a nylon bag nsde the drum that
contans a pece of styrofoam. Hold t
from ts secton marked wth XX XX.
3. Pull the nylon towards yourself and
remove the transportaton safety
assembly.
A
Make sure that no part of the
transportation safety assembly
remains inside the drum.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DPU 7380 X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DPU 7380 X in the language / languages: English as an attachment in your email.

The manual is 5,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DPU 7380 X

BEKO DPU 7380 X User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info