582404
52
Zoom out
Zoom in
Previous page
1/64
Next page
52 / 64 EN
Dryer / User Manual
Auxiliary functions
Audio Warning
The machine will give an audio warning when the
programme comes to an end. If you do not want the
machine give an audio warning, press the Volume Level
button repeatedly until “x” appears on the display. Use
the same button to adjust the volume level.
C
You can activate this function either
before or after the programme starts.
Cancel
audio warning
Audio warning
level 1
Audio warning
level 2
Audio warning
level 3
Dryness level
Used to adjust the required dryness level. More drying is
performed compared to the default settings when “+”
sign appears and less drying is performed when “-” sign
appears. Programme duration can change depending on
the selection.
C
You can activate this function only before
the programme has started.
Anti-creasing
You can use Anti-creasing function to prevent laundry
from creasing if you will not take the laundry out after
the program has come to an end. This program rotates
the laundry in every 240 second for 2 hours to prevent
creasing.
Anti-creasing is activated but the programme is still
running in the first display image below. Drying cycle is
completed and the Anti-creasing step has started in the
second display image.
C
Press Anti-creasing button to activate this
function.
Changing the contrast
Adjust the display contrast in order to make the symbols
on the display appear clearer. It may particularly be
necessary to change the contrast setting of the display
when the dryer is installed over a washing machine.
Press and hold the Spin Speed / Timer Programme
button for 3 seconds.
When the contrast is changed, all symbols on the
display will appear for 3 seconds in order to indicate
that the process is complete.
C
Perform the same procedure to revert
back to the previous contrast setting.
Warning symbols
C
Warning symbols may differ according to
the model of your machine.
Lint filter cleaning
When the programme is completed, a warning symbol
will appear to remind that the filter needs to be cleaned.
C
If the Filter Cleaning symbol flashes
continuously, refer to “Troubleshooting”
section.
Water tank
When the programme is completed, a warning symbol
will appear to remind that the water tank needs to be
drained.
If the water tank becomes full while the programme
is running, the warning symbol will start to flash and
machine will pause. Drain the water in the water tank
and press Start / Pause / Cancel button to resume
the programme. The warning symbol turns off and the
programme resumes operating.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DPU 7305 XEL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DPU 7305 XEL in the language / languages: English, German as an attachment in your email.

The manual is 4,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info