579372
49
Zoom out
Zoom in
Previous page
1/56
Next page
49 / 56 EN
Dryer / User Manual
Operating the product
5.13 Changing the program after it is
started
After the machine starts running, you can change
the program you selected to dry your laundry with a
different program.
1. For example, to select Extra Dry program instead
of the Iron Dryness, stop the program by pressing
the Start / Pause button.
2. Turn the Program Selection knob to select the
Extra Dry program.
3. Start the program by pressing the Start / Pause
button.
Adding and removing laundry in stand-by mode
If you want to add or remove laundry after the drying
program starts:
1. Press the Start/Pause button to take the machine
into Stand-by mode. Drying operation stops.
2. Open the loading door, add or remove laundry and
close the loading door.
3. Start the program by pressing the Start / Pause
button.
C
The laundry adding made after the drying
operation started may cause the dried
laundry inside the machine to mix with
the wet laundry and the laundry to remain
damp after the operation ends..
C
Laundry adding and removing can be
repeated as much as desired during
drying operation.
But this process would continuously
interrupt the drying operation, and so
would cause the program duration
to lengthen and increase energy
consumption. Thus, it is recommended to
add laundry before the program starts.
C
If a new program is selected by changing
the position of the program selection knob
while your machine is in stand-by mode,
the running program ends.
Do not contact the inner surface of the
drum when adding or removing laundry
during a continuing program. The drum
surface is hot.
Canceling the end duration function
If you want to cancel the end duration setting
countdown and start the program right away:
1. Cancel the program by pressing the On/Off button.
Turn on the drying machine again by pressing the
On/Off button. When your drying machine turns on
for the first time, it turns on with the declaration
(cotton wardrobe dryness) program.
2. Select the program you desire using the Program
Selection knob.
3. Start the program by pressing the Start / Pause
button.
5.11 Starting the program
Start the program by pressing the Start / Pause button.
Start/Pause led and the Drying led light up, indicating
the program started. The “:” sign in the middle of the
remaining duration starts to blink.
5.12 Child Lock
The machine features a child lock which prevents
the machine program flow from being affected when
buttons are pressed during operation.
When the Child Lock is active, all buttons except for the
On/Off button are deactivated.
To activate the child lock, press the Sound Notification
button and End Duration button simultaneously for 3
seconds.
Te child lock should be deactivated to be able to start
a new program after the current program ends or to
be able to interfere with the current program. Keep the
same buttons pressed for 3 seconds again to deactivate
the child lock.
C
The lock led on the screen lights up when
the Child Lock is activated.
C
Child Lock deactivates when the machine
is turned off and on again using the On/
Off button.
A warning sound is heard when any button is pressed
(except for On/Off button) or the Program Selection knob
is turned while the child lock is active.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DPS 7343 X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DPS 7343 X in the language / languages: English, Dutch as an attachment in your email.

The manual is 3,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DPS 7343 X

BEKO DPS 7343 X User Manual - German, French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info