762745
32
Zoom out
Zoom in
Previous page
1/47
Next page
32/EN
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
IonGuard function
(depends on the model)
IonGuard function is enabled at regular
intervals and prevents the formation of
bad odours due to putrefaction. If this
function is selected, it will be activated
while the product is turned off and the
IonGuard indicator on the panel will flash.
A ventilation noise can be heard, this
is normal. Until the function selection is
disabled, system is automatically activated
intermittently.
SelfDry
(Depends on the Model)
Thanks to the “SelfDry” feature on your
machine, the drying effectiveness of your
machine is improved and power is saved.
There are two options, namely “OFF” and
“ON”.
You may use sub-menu settings to change
“SelfDry” settings.
When you activate this function, the door
of your machine is opened automatically at
the end of the washing cycle.
Auto door opening feature opens the
doors at the end of the washing cycle
thanks to the “door opening shafts”.
This process takes about 2 minutes.
Do not force to close the door if the
power is interrupted while the shafts
are moving out. Operation shall be
completed and shafts shall be retracted
when the power is restored.
SelfDry function may cause changes to
the cycle time.
Changing SelfDry Settings
1. Press the Delay and Start/Pause/
Cancel key simultaneously for 3
seconds after turning on your machine.
2. Press the Delay key until 3 hours delay
indicator is illuminated in the menu.
Using the function keys, set the SelfDry
function on or off. Function is off when
the first cycle indicator is illuminated,
and it is turned on when the second
cycle indicator is illuminated.
3. Turn off your machine with the On/Off
key to save the setting.
Programming the washing time
Time Delay
If an economical electricity tariff is applied
in your region, you can use the time
delay function to wash your dishes during
appropriate hours.
You can delay the start of the selected
programme up to 9 hours.
Hold the delayed start key pressed for
1 second more than the other keys.
1. Press the time delay key after selecting
the washing programme and other
auxiliary functions.
2. Once you press the Time Delay key "3
hours" Time Delay indicator will start
flashing.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DIN15320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DIN15320 in the language / languages: English as an attachment in your email.

The manual is 12,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DIN15320

BEKO DIN15320 User Manual - German - 50 pages

BEKO DIN15320 User Manual - Dutch - 45 pages

BEKO DIN15320 User Manual - French - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info