674244

BEKO DIN15310 Manual

15
Zoom out
Zoom in
Previous page
1/51
Next page
Dishwasher / User’s Manual
13 / 49
EN
Preparation
Use the test strip supplied with the product according to the steps given below to
determine hardness level of your supply water.
a b
c
d e f
Remove the test
strip from the
packet.
Turn on the tap and
let the water run for
about a minute.
Hold the test strip in
the water for about
a second.
Remove the test
strip from the water
and shake it.
Wait for 1 minute. The test strip shows
you the hardness
level.
1 Second
1 Minute
1 min.
After determining hardness level of the supply water:
1. Switch on the machine and press the Time Delay and P keys simultaneously. Hold
the keys pressed until entering the Settings menu. Rinse Aid and Salt indicators (model
dependant) will flash on the display.
2. Select the salt indicator with the program key. Current regeneration level is displayed on
the display.
3. Using Time Delay key, adjust water hardness level according to the hardness of the
supply water. For correct setting please see “Water hardness level adjustment table”.
4. Press On / Off key to save the setting.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF
Water Hardness Level Indicator
0th Level
0-5 0-4 0-8
Press the Time Delay key to switch the water hardness
level to position P1.
1st Level
6-9 5-7 9-13
2nd Level
10-15 8-12 14-22
Press the Time Delay key to switch the water hardness
level to position P2.
3rd Level
16-19 13-15 23-27
Press the Time Delay key to switch the water hardness
level to position P3.
4th Level
20-24 16-19 28-34
Press the Time Delay key to switch the water hardness
level to position P4.
5th Level
25-62 20-50 35-90
Press the Time Delay key to switch the water hardness
level to position P5.
If the hardness level of the supply water is above 90 °dF or if you are using well water, then
it is recommended to use water purification devices and special filters.
If the hardness level of the supply water is below 13°dF, there is no need to use salt in your
dishwasher. If this is the case, “No Salt Warning Indicator” (if any) illuminates continuously
on the panel of your machine.
If the water hardness level adjustment is set to level 1, the “No salt warning indicator” will
illuminate continuously although it is not necessary to use salt. If you use salt under this
condition, salt will not be consumed and the Salt indicator will not illuminate.
… 15 …


Need help? Post your question in this forum.

Forumrules
1

Forum

beko-din15310

Reset search

  • My Beko DIN15310 wont stay turned on. Switch the power on at the wall and it beeps once, lights come on then turns off completely. Any ideas on what might cause this issue? Submitted on 20-6-2020 at 14:24

    Reply Report abuse

    • Did you get any answers to your request as I've also got the same error at the moment Answered on 19-9-2022 at 19:41

      Vote up Report abuse

    • I also have this issue so would be really keen to know if you ever got a positive response, many thanks. Answered on 27-10-2022 at 22:29

      Vote up Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DIN15310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DIN15310 in the language / languages: English as an attachment in your email.

The manual is 15,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DIN15310

BEKO DIN15310 Installation Guide - Dutch - 13 pages

BEKO DIN15310 User Manual - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info