Manual BEKO DHR83431 (page 16 of 28) (English)

757693

Zoom out

Zoom in

1/28

16 Dryer / User Manual

Canceling the end duration function

If you want to cancel the end duration setting

countdown and start the program right away:

1. Cancel the program by pressing the On/

Off button. Turn on the drying machine

again by pressing the On/Off button.

When your drying machine turns on

for the first time, it turns on with the

declaration (cotton wardrobe dryness)

program.

2. Select the program you desire using the

Program Selection knob.

3. Start the program by pressing the Start /

Pause button.

5.9 Starting the program

Start the program by pressing the Start / Pause

button.

Start/Pause led and the Drying led light up,

indicating the program started. The “:” sign in

the middle of the remaining duration starts to

blink.

5.10 Child Lock

The machine features a child lock which

prevents the machine program flow from being

affected when buttons are pressed during

operation.

When the Child Lock is active, all buttons

except for the On/Off button are deactivated.

To activate the child lock, press the Sound

Notification button and End Duration button

simultaneously for 3 seconds.

Te child lock should be deactivated to be

able to start a new program after the current

program ends or to be able to interfere with

the current program. Keep the same buttons

pressed for 3 seconds again to deactivate the

child lock.

CNOTE

• The lock led on the screen lights up

when the Child Lock is activated.

• Child Lock deactivates when the

machine is turned off and on again using

the On/Off button.

A warning sound is heard when any button

is pressed (except for On/Off button) or the

Program Selection knob is turned while the

child lock is active.

5.11 Changing the program after it is

started

After the machine starts running, you can

change the program you selected to dry your

laundry with a different program.

1. For example, to select Extra Dry program

instead of the Iron Dryness, stop the

program by pressing the Start / Pause

button.

2. Turn the Program Selection knob to select

the Extra Dry program.

3. Start the program by pressing the Start /

Pause button.

Adding and removing laundry in stand-by

mode

If you want to add or remove laundry after the

drying program starts:

1. Press the Start/Pause button to take the

machine into Stand-by mode. Drying

operation stops.

2. Open the loading door, add or remove

laundry and close the loading door.

3. Start the program by pressing the Start /

Pause button.

CNOTE

• The laundry adding made after the drying

operation started may cause the dried

laundry inside the machine to mix with

the wet laundry and the laundry to remain

damp after the operation ends.

• If a new program is selected by changing

the position of the program selection

knob while your machine is in stand-by

mode, the running program ends.

• Laundry adding and removing can be

repeated as much as desired during

drying operation.But this process

would continuously interrupt the drying

operation, and so would cause the

program duration to lengthen and

increase energy consumption. Thus, it is

recommended to add laundry before the

program starts.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DHR83431 in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO DHR83431 Manual

Product: