757667
44
Zoom out
Zoom in
Previous page
1/52
Next page
44 Dryer / User Manual
Open the loading door and place the
laundry.
Select drying program, spin cycle and if
needed, additional functions.
Press the End Time selection button and
set the delay time you wish. End Time
symbol turns on. (When pressed and hold
the button, End Time proceeds non-stop).
Press the Start / Stand-by button. End
time countdown starts and Start symbol
turns on. “:” Separator in the middle of
displayed delay time flashes.
CNOTE
You can add or remove laundry within
end time. End Time symbol will turn off at
the end of countdown, drying starts and
duration of program is displayed. Displayed
time is the sum of normal drying time and
end time.
Changing the end time
If you want to change the duration during the
countdown:
Press the On/Off/Cancel button for 3
seconds to cancel the program. Turn on
the machine again and repeat the Delay
Setting process for the duration you wish.
When your machine is turned on for the
first time, it turns on with the declaration
program (cotton wardrobe dry).
Cancelling the end time function
If you want to cancel the end time countdown
and start the program immediately:
Press the On/Off/Cancel button for 3
seconds to cancel the program.
Press the On/Off/Cancel button to start
you previously selected program.
5.8 Starting the program
Press the Start/Stand-by button to start the
program.
Indicating start of the program, Start symbol
turns on, “:” separator in the middle of
remaining time keeps flashing. Program
Progress Symbol turns on.
5.9 Program progress status
5.10 Child Lock
The machine has a child lock which prevents
the program flow from being interrupted when
the buttons are pressed during a program. To
activate the child lock
Press and hold time programs and audio
warning buttons for 3 seconds.
When the child lock is activated, the lock
symbol on the screen turns on.
When the child lock is activated, all
buttons on the panel except the On/
Off/Cancel and Child Lock buttons are
deactivated.
When the child lock is activated, indicator
symbols don’t change if the position of
Program Selection button is changed.
When Program Selection button is turned
and function buttons are pressed, the
letters “CL” flashes on the screen.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DH 8736 RX0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DH 8736 RX0 in the language / languages: English, German as an attachment in your email.

The manual is 6,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DH 8736 RX0

BEKO DH 8736 RX0 User Manual - Dutch, French - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info