676666

BEKO DH 8533 GA0 Manual

52
Zoom out
Zoom in
Previous page
1/64
Next page
52 / EN
Dryer / User Manual
Operating the product
5.8 Auxiliary functions
Sound warning cancel
Drying machine makes sound warnings
when the program is completed. If you don’t
want sound notifications, press the “Sound
Notification” button.
When you press the sound notification
button it lights up, and program does not
make sound notifications when completed.
C
You can select this function
before or after the program
starts.
5.9 Warning symbols
C
Warning symbols may vary
according to the specifications of
your machine.
Fiber filter cleaning
When the program is completed, a warning
led lights up, which indicates that the filter
has to be cleaned.
C
If the filter cleaning led blinks, see
the „Troubleshooting“ chapter.
Water tank
When the program is completed, a warning
led lights up, which indicates that the water
tank must be emptied.
If the water tank fills up while the program
is running, warning led starts blinking and
the machine goes into stand-by. In that
case empty the water in the water tank and
start the program by pressing the Start /
Pause button. Warning led turns off and the
program resumes.
Loading door open
Start/Pause led blinks when the loading door
of the drying machine is open.
5.10 End duration
You can delay the end duration of the
program for up to 24 hours with the end
duration function.
1. Open the loading door and place your
laundry.
2. Select the drying program.
3. Press the end duration selection button
and set the delay duration you want.
End duration led lights up. (End duration
moves continuously when you keep
pressing the button).
4. Press the Start / Pause button. End
duration countdown begins. The “:”
sign in the middle of the displayed delay
duration blinks.
C
You can add or remove laundry
for the duration of the end
duration. The duration displayed
on the screen is the sum of the
normal drying duration and the
end duration. At the end of the
countdown the end duration
led turns off, drying beings and
drying led lights up.
Changing the end duration
If you want to change the duration during
the countdown:
1. Cancel the program by pressing the On/
Off button. Turn on the drying machine
again by pressing the On/Off button.
When your drying machine turns on
for the first time, it turns on with the
declaration (cotton wardrobe dryness)
program.
2. Select the program you desire using the
Program Selection knob.
3. Repeat the end duration operation for
the duration you want.
4. Start the program by pressing the Start /
Pause button.
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DH 8533 GA0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DH 8533 GA0 in the language / languages: English, German as an attachment in your email.

The manual is 4,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DH 8533 GA0

BEKO DH 8533 GA0 User Manual - Dutch, French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info