676675
52
Zoom out
Zoom in
Previous page
1/60
Next page
52 / EN
Dryer / User Manual
Operating the product
C
The laundry adding made after
the drying operation started may
cause the dried laundry inside
the machine to mix with the
wet laundry and the laundry to
remain damp after the operation
ends..
C
Laundry adding and removing
can be repeated as much as
desired during drying operation.
But this process would
continuously interrupt the
drying operation, and so would
cause the program duration
to lengthen and increase
energy consumption. Thus, it is
recommended to add laundry
before the program starts.
C
If a new program is selected by
changing the position of the
program selection knob while
your machine is in stand-by
mode, the running program ends.
Do not contact the inner surface
of the drum when adding or
removing laundry during a
continuing program. The drum
surface is hot.
5.14 Canceling the program
If you want to cancel the program and end
the drying operation for any reason after the
machine starts running, press the On/Off
button.
A
As it will be extremely hot inside
the machine when you cancel
the program while the machine is
in operation; run the ventilation
program to cool it down.
5.15 Program end
When the program ends, the Final/Wrinkle
Prevention, Fiber Filter Cleaning and Water
Tank Warning leds on the program follow
up indicator light up. Loading door can be
opened and machine becomes ready for a
second run.
Press the On/Off button to turn off the
machine.
C
In case the laundry is not
removed after the program
is completed, the wrinkle
prevention program that lasts 2
hours start in order to prevent
wrinkling of the laundry that
remains inside the machine.
C
Clean the fiber filter after each
drying. (See. „Fiber filter and
loading door inner surface“)
C
Empty the water tank after
each drying. (See. „Emptying the
water tank“)
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DH 8433 RXM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DH 8433 RXM in the language / languages: English, German as an attachment in your email.

The manual is 3,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DH 8433 RXM

BEKO DH 8433 RXM User Manual - Dutch, French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info