762765
30
Zoom out
Zoom in
Previous page
1/43
Next page
30/EN
Salt indicator
Please check the salt indicator to see
whether there is adequate amount of
softening salt in the dishwasher or not.
You need to refill the salt reservoir with salt
whenever the no-salt warning symbol lights.
Adjusting the water hardness level is
explained in Water Softening System
section.
Rinse Aid indicator
Please check the rinse aid indicator to see
whether there is adequate amount of rinse
aid in the dishwasher or not. You need to
refill the rinse aid dispenser with rinse aid
whenever the no rinse aid warning symbol
lights.
End of programme
End of Programme indicator will light up
once the washing programme is over.
1. Press On/Off/Programme Selection key
to switch off the product.
2. Close the tap.
3. Unplug the machine from the socket.
Leave your dishes in the machine for
about 15 minutes after they are washed
in order to have them cooled. Your dishes
will dry in a shorter time if you leave the
door of your machine ajar during this
period. This process will increase the drying
effectiveness of your machine
Adjusting the amount of rinse
aid
1. While the Programme Selection Knob
is in “Off” position, press and hold the
function key and turn the Programme
Selection Knob clockwise by one level,
keeping the function key pressed for
2 seconds. At the end of this time,
the machine will enter the rinse aid
adjustment mode.
2. Once the machine has entered the
rinse aid adjustment mode, the stored
rinse aid level will be shown on the
programme follow-up LEDs for 5
seconds.
3. For the new Rinse Aid setting, set the
Programme Selection Knob to the
relevant position.
4. Press Start / Pause / Cancel key
for once to store the level you have
selected.
5. When you set the Programme
Selection Knob to the “Off” position
again, the machine will enter the
normal mode.
Rinse Aid
Amount
Position of
program
selection
knob
Rinse Aid Adju󰀬ment
Indicator
1 dose of
rinse aid is
dispensed.
1
Washing lamp
on the panel will
illuminate.
2 doses of
rinse aid are
dispensed.
2
Drying lamp on
the panel will
illuminate.
3 doses of
rinse aid are
dispensed. 3
End lamp on
the panel will
illuminate.
4 doses of
rinse aid are
dispensed. 4
Washing, Drying
and End lamps
on the panel will
illuminate.
No rinse aid
dispensed
in washing
programme.
5
Washing, Drying
and End lamps
on the panel will
ash at 1-second
intervals.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DFS05020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DFS05020 in the language / languages: English as an attachment in your email.

The manual is 8,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DFS05020

BEKO DFS05020 User Manual - German - 41 pages

BEKO DFS05020 User Manual - Dutch - 40 pages

BEKO DFS05020 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info