556318
28
Zoom out
Zoom in
Previous page
1/38
Next page
28/EN
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
Interior Lighting
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
Programming the Washing
Period
Time Delay key
You may delay the start time of the program
up to 9 hours with the Delay key. Press the
Start / Pause / Cancel key after delaying.
Program starts automatically when the
delay period is over.
With each press on the Delay key, 3-6-9
hours indicators start to flash. When you
press the Start / Pause / Cancel key while
the delay indicator you have selected is
flashing, the delay indicator illuminated
continuously and the count down starts.
When the delay period is over, the delay
indicator is turned off and the washing
program you have selected starts.
The delay indicators are turned off
if you press the Delay key while the
9-hour delay lamp is flashing. When
you press the Start / Pause / Cancel
key while the delay indicators are off,
the program you have selected shall
start without delay.
You may monitor the remaining time on
the delay from the delay indicators. For
example: When you select the 9-hour
delay option, 6-hour indicator shall start
to illuminate when the remaining time
for the start of washing program is 6
hours.
To cancel the delay function:
When you press the Start / Pause / Cancel
key for 3 seconds while the delay function
is active, the delay process shall be
cancelled.
Starting of the program
Press the Start / Pause / Cancel key to start
your machine after selecting the program
and additional functions.
To deactivate the feature of SelfDry:
1. Press the button of SelfDry. When the
function is deactivated, the indicator
showing the selection of the function
turns off.
2. SelfDry is deactivated.
SelfDry opens the door of the machine
at the end of the washing circle,
thanks to the "door opening shafts".
This process takes approximately 2
minutes. If the power fails while the
shafts are moving out, do not force
to close the door. When the power is
back, the process shall be completed,
and the shafts shall return to their initial
position.
The function of SelfDry may change
the duration of the selected program.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DFS 1312 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DFS 1312 in the language / languages: English as an attachment in your email.

The manual is 7.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DFS 1312

BEKO DFS 1312 User Manual - German - 30 pages

BEKO DFS 1312 User Manual - Dutch - 40 pages

BEKO DFS 1312 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info