762685
32
Zoom out
Zoom in
Previous page
1/48
Next page
32/EN
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
Scheduling the washing time
Time Delay
If an economical electricity tariff is applied
in your region, you can use the Time
Delay function to wash your dishes during
appropriate hours.
You can delay the start of the selected
programme until 3-6-9 hours. Time Delay
cannot be set after the programme starts.
1. Press the Time Delay function key after
selecting the washing programme and
other auxiliary functions.
during the last washing programme
you used, Tablet function will remain
active in the next washing programme
you will select. If you do not want to
use these functions in the new program
you have selected, press the Tablet
Detergent key until the indicator of the
relevant function turns off.
Tablet Detergent function may cause
change in the programme duration.
SelfDry
(Depends on the Model)
“SelfDry” feature of your machine increases
drying efficiency of your machine and saves
energy. There are two options: "OFF" and
"ON".
To activate the feature of SelfDry:
1. Press SelfDry button. When the
function is active, the indicator showing
the selection of the function lights up.
2. SelfDry is activated.
When you activate this function, the door
of your machine opens automatically at the
end of the washing program.
To deactivate the feature of SelfDry:
1. Press the button of SelfDry. When the
function is deactivated, the indicator
showing the selection of the function
turns off.
2. SelfDry is deactivated.
SelfDry opens the door of the machine
at the end of the washing circle,
thanks to the "door opening shafts".
This process takes approximately 2
minutes. If the power fails while the
shafts are moving out, do not force
to close the door. When the power is
back, the process shall be completed,
and the shafts shall return to their initial
position.
The function of SelfDry may change
the duration of the selected program.
Interior Lighting
(depends on the model)
Some models have interior lighting to
illuminate the interior when the door is
opened.
1. After switching on your machine, press
and hold Time Delay and Program keys
simultaneously for 3 seconds.
2. Press and hold the program key until the
Rinse Aid indicator starts to flash. The
applicable options will be displayed on
the program indicator as follows:
Interior lighting ON - [P1]
Interior lighting OFF - [P3]
3. You can turn ON or OFF the interior
lighting with the time delay key.
4. Switch off the machine with the On/Off
key to save the changes.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DFN16430G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DFN16430G in the language / languages: English as an attachment in your email.

The manual is 12,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DFN16430G

BEKO DFN16430G User Manual - German - 46 pages

BEKO DFN16430G User Manual - Dutch - 47 pages

BEKO DFN16430G User Manual - French - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info