528064
26
Zoom out
Zoom in
Previous page
1/44
Next page
26
EN
CNever unscrew the adjustable feet from their
housings.
Electrical connection
Connect the machine to a grounded outlet
protected by a fuse of suitable capacity as stated
in the technical specifications table. Our company
shall not be liable for any damages that will arise
when the machine is used on a circuit without
grounding.
Connection must comply with national
regulations.
If the current value of the fuse or breaker in the
house is less than 16 Amps, have a qualified
electrician install a 16 Amp fuse.
Power cable plug must be within easy reach
after installation.
The voltage and allowed fuse or breaker
protection are specified in the “Technical
Specifications” section.
The specified voltage must be equal to your
mains voltage.
Do not make connections via extension cables
or multi-plugs.
The main fuse and switches must have a
contact distance of minimum 3 mm.
BDamaged power cable must only be replaced by
a qualified electrician.
BIf the product is faulty, it must not be operated
unless it is repaired! There is the risk of electric
shock!
First use
To have the product ready for operation before
calling the authorised service agent, make sure
that its location and power supply installations
are appropriate. If they are not, call a qualified
electrician to have any necessary arrangements
carried out.
Make sure that the power connections of the
product are in accordance with the instructions
given in relevant chapters of this manual.
Disposing of packaging material
Packaging materials are dangerous to children.
Keep packaging materials in a safe place out
of reach of children. Packaging materials of
your product are manufactured from recyclable
materials. Sort and dispose of them in accordance
with recycled waste instructions. Do not dispose of
them with normal domestic waste.
Transportation of the machine
1. Unplug the machine from the mains.
2. Remove the water drain (if any) and chimney
connections.
3. Drain water remained in the machine
completely before transportation.
1. Remove the hose on the machine by pulling it out
from its end. Do not use any tools to take out the
hose.
2. Connect the special drain hose supplied with the
machine to the pipe fitting.
3. The other end of the drain hose can be directly
connected to the wastewater drain or to the
washbasin. The fitting must always be secured
in all types of connections. Your house may be
flooded if the hose gets out of its housing during
water discharge.
Important:
The hose should be attached to a height of
maximum 80 cm.
You must be careful not the pinch or bend the
hose.
The end of the hose should not be bent, it should
not be stepped on and it must not be folded
between the drain and the machine.
Adjusting the feet
In order to ensure that your machine operates
more silently and vibration-free, it must stand level
and balanced on its feet. Balance the machine by
adjusting the feet.
Rotate the feet to adjust until the machine stands
level and firmly.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DCU 7330 XS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DCU 7330 XS in the language / languages: English, Dutch as an attachment in your email.

The manual is 4,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DCU 7330 XS

BEKO DCU 7330 XS User Manual - German - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info