Manual BEKO DCU 7230 X (page 32 of 72) (English, German, Dutch, French)

475431

Zoom out

Zoom in

1/72

as much as desired during a drying

process, but this process will extend the

programme duration and increase energy

consumption since the drying will be

interrupted continuously. Therefore, it is

recommended to add laundry before the

drying programme has started.

Child-proof lock

There is a child-proof lock to prevent any

programme interruption due to the pressing of

button while the programme is running. The

loading door and all buttons except the “On/

Off” button on the control panel are deactivated

when the child-proof lock is active.

Press the “Start/Pause/Cancel” and “Cancel

audio warning” buttons simultaneously for 3

seconds to activate the child-press lock.

To start a new programme after the programme

is over or to interrupt the programme, the child-

proof lock should be deactivated. Press the

same buttons for 3 sec. again to deactivate the

child-proof lock.

C Child-proof lock is deactivated when the

machine is restarted by pressing the On/Off

button.

C Press the relevant buttons for 3 seconds

to activate the child-proof lock. A long

beep will be heard and the child-proof lock

will be activated. A double beep will be

heard if you press any button or turn the

programme selection knob while the child-

proof lock is active. Press the buttons for 3

seconds to deactivate the child-proof lock.

Single beep will be heard and child-proof

lock will be deactivated.

A A double beep will be heard if you turn

the programme selection knob when the

machine is running and the child-proof

lock is active. If you deactivate the child-

proof lock without returning the program

selection knob to its previous position, the

programme will be terminated since the

position of the programme selection knob

is changed. The drying light turns on and

the machine remains on hold until a new

programme is selected and the “Start/

Pause/Cancel” button is pressed.

Ending the programme through

canceling

To cancel any selected programme:

Press “Start/Pause/Cancel” button for about

3 seconds. The “Filter cleaning”, “Water tank”

and “End/ Anti-creasing” warning lights will

turn on at the end of this period for reminding

purposes.

A As the inside of the dryer will be excessively

hot when you cancel the programme while

the dryer is running, activate the ventilation

programme to cool it down.

End of programme

The “End/Anti-creasing”, “Filter cleaning” and

“Water tank” warning lights on the programme

follow up indicator will turn on when the

programme comes to an end. The door can be

opened and the machine becomes ready for a

second cycle.

Press “On/Off” button to turn off the dryer.

C Final step of the drying cycle (cooling step)

is performed without heat application in

order to keep the items at a temperature

that would not harm them.

C A 2-hour anti creasing programme to

prevent laundry from creasing will be

activated if you do not take the laundry out

after the programme has come to an end.

C If you will not take the laundry out

immediately, do not stop the dryer before

the drying process is complete.

C Clean the filter after each drying (please

see, Filter cleaning).

C Drain the water tank after each drying

(please see, Water tank)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DCU 7230 X in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO DCU 7230 X Manual

Product: