Manual BEKO DCU 7230 X (page 21 of 72) (English, German, Dutch, French)

475431

Zoom out

Zoom in

1/72

1 Important safety information

This section includes safety information that will

help protection from risks of personal injuries

or materialistic damages. Failure to follow

these instructions shall cause any warranty and

reliability commitment to become void.

General safety

• Never place the machine on a carpet-

covered floor, otherwise, lack of airflow

beneath the machine may cause electrical

parts to overheat. This will cause problems

with your machine.

• If the power cable or mains plug is

damaged, you must call Authorised Service

Agent for repair.

• The product should not be plugged in

during installation, maintenance and repair

works. Such works should always be made

by the technical service. Manufacturer shall

not be held responsible for damages arising

from processes carried out by unauthorised

persons.

• Connect the product to a grounded outlet

protected by a fuse of suitable capacity as

stated in the technical specifications table.

• Operate your product at temperatures

between +5°C and +35°C.

• Do not use electrical devices in the product.

• Do not connect the air exit of the product

to the chimney holes which are used for the

exhaust fumes of the devices operating with

gas or other types of fuel.

• You must provide enough ventilation in

order to prevent gases exiting from devices

operating with other types of fuels including

the naked flame from accumulating in the

room due to the back fire effect.

• Always clean the lint filter before or after

each loading.

• Never operate your dryer without the lint

filter installed.

• Do not allow fibre, dust and dirt

accumulation around the exhaust exit and

at adjacent areas.

• Power cable plug must be within easy

reach after installation.

• Do not use extension cords, multi-plugs

or adaptors to connect the dryer to power

supply in order to decrease the risk of

electric shock.

• Do not make any changes on the plug

supplied with the product. If it is not

compatible with the socket, have a qualified

electrician change the socket with a

suitable one.

• Items cleaned or washed with gasoil/fuel oil,

dry-laundry solvents and other combustible

or explosive materials as well as the items

that are contaminated or spotted with such

materials should not be dried in the product

since they emit flammable or explosive

vapor.

• Do not dry items cleaned with industrial

chemicals in the dryer.

• Do not dry unwashed items in the dryer.

• Items soiled with cooking oils, acetone,

alcohol, fuel oil, kerosene, stain remover,

turpentine, paraffin and paraffin removers

must be washed in hot water with plenty of

detergent before being dried in the dryer.

• Garments or pillows bolstered with rubber

foam (latex foam), shower bonnets, water

resistant textiles, materials with rubber

reinforcement and rubber foam pads should

not be dried in the dryer.

• Do not use fabric softeners and anti-static

products unless they are recommended by

the manufacturers of the fabric softener or

the product.

• This product must be grounded. Grounding

installation decreases the risk of electric

shock by opening a path with low

resistance for the electricity flow in case of

a malfunction or failure. Power cable of this

product is equipped with a conductor and

a grounding plug that allows for grounding

the product. This plug must be installed

appropriately and inserted into a socket

which is grounded in accordance with the

local laws and regulations.

• Do not install the product behind a door

with a lock, sliding door or a door that has a

hinge against the hinge of the dryer.

• Do not install or leave this product in

places where it will be exposed to outdoor

conditions.

• Do not tamper with the controls.

• Do not perform any repair or part replacing

procedures on the product even if you

know or have the ability to perform unless

it is clearly suggested in the operating

instructions or the published service

manual.

• Inside and exhaust duct of the product

must be cleaned by the qualified service

personnel periodically.

• Wrong connection of grounding conductor

of the product can cause electric shock. If

you have any suspect about the grounding

connection, have it checked by a qualified

electrician, service representative or service

personnel.

• Do not reach into the machine when the

drum is spinning.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DCU 7230 X in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO DCU 7230 X Manual

Product: