676654
37
Zoom out
Zoom in
Previous page
1/44
Next page
37
Dryer / User Manual
WARNING!
Do not touch the inner surface of the
drum while adding or removing clothes
during a continuing programme. The
drum surface is hot.
5.10 Cancelling the programme
If you want to cancel the programme and
terminate the drying operation for any reason
after the drying machine starts running, turn the
On/Off/Cancel knob, the programme will be
cancelled.
AWARNING!
The inside of the drying machine shall
be extremely hot when you cancel the
programme during machine operation, so
run the refresh programme to allow it to
cool down.
5.11 End of programme
When the programme ends, the Fibre Filter
Cleaning and Water Tank warning symbols on
the programme observation indicator turn on.
Loading door may be opened and the dryer
machine becomes ready for another run.
Bring the On/Off/Programme selection knob to
On/Off position to turn the drying machine off.
CNOTE
If the laundry is not removed after the
programme is completed, the wrinkle
prevention function activates for 2 hours
to prevent the laundry inside the machine
to get wrinkled. The programme tumbles
the laundry with 10-minute intervals to
prevent them from wrinkling.
5.9 Changing the programme after it
is started
You can change the programme you selected
to dry your laundry with a different programme
after the drying machine starts running
For instance, select Extra Dry programme
by turning the On/Off/Programme
selection knob to select Extra Dry instead
of Iron Dry.
Press the Start/Stand-by button to start
the programme.
Adding and removing clothes during
stand-by
If you want to add or remove clothes to/from
the drying machine after the drying programme
starts:
Press the Start/Stand-by button to put
the drying machine in Stand-by state. The
drying operation stops.
Open the loading door while in Stand-
by state, and close the door after you
remove or add laundry.
Press the Start/Stand-by button to start
the programme.
CNOTE
Adding laundry after the drying operation
starts may cause the dried laundry inside
the machine to mix with wet laundry and
leave the laundry damp at the end of
operation.
Adding or removing laundry during drying
may be repeated as many times as you
wish. But this operation continuously
interrupts the drying operation, and
thus increases programme duration
and energy consumption. So, it is
recommended to add laundry before the
programme starts.
If a new programme is selected by
turning the programme selection knob
while the drying machine is in stand-by,
the running programme terminates.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DCU 720030 BX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DCU 720030 BX in the language / languages: English, German as an attachment in your email.

The manual is 3,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DCU 720030 BX

BEKO DCU 720030 BX User Manual - Dutch, French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info