676652
40
Zoom out
Zoom in
Previous page
1/44
Next page
40 Dryer / User Manual
7 Troubleshooting
Drying operation takes too long.
Fibre filter pores might be clogged. >>> Wash the filter with
warm water.
Filter drawer might be clogged. >>> Clean the sponge and
filter cloth (if any) in the filter drawer. (for the products with a
heat pump)
The condenser might be blocked. >>> Wash the
condenser.(for the products with a condenser )
The ventilation grills in front of the machine may be closed.
>>> Remove any objects in front of the ventilation grills that
blocks air.
Ventilation may be inadequate because the area the
machine is installed in is too small. >>> Open the door or
windows to prevent the room temperature from rising very
high.
A lime layer may have accumulated on the humidity
or temperature sensors. >>> Clean the humidity or
temperature sensors.
Excessive amount of laundry might be loaded. >>> Do not
load the drying machine excessively.
Laundry might not have been wrung adequately. >>>
Perform a higher speed wringing on the washing machine.
Clothes come out damp after drying.
A program not suitable for the laundry type may have been
used.>>> Check the maintenance labels on the clothes and
select a program suitable for the clothes’ type or use time
programs as extra.
Fibre filter pores might be clogged. >>> Wash the filter with
warm water.
The condenser might be blocked. >>> Wash the
condenser. (for the products with a condenser)
Filter drawer might be clogged. >>> Clean the sponge and
filter cloth (if any) in the filter drawer.(For the products with a
heat pump)
Excessive amount of laundry might be loaded. >>> Do not
load the drying machine excessively.
Laundry might not have been wrung adequately. >>>
Perform a higher speed wringing on the washing machine.
Drying machine does not turn on or program cannot be
started. Drying machine does not run after it is configured.
Power plug might be unplugged. >>> Make sure the power
cord is plugged in.
Loading door might be open. >>> Ensure that the loading
door is properly closed.
A program might not be set or Start/Stand-by button might
not be pressed. >>> Check that the program is set and it is
not in Stand-by position.
Child lock may be activated. >>> Turn off the child lock.
Program terminated prematurely for no reason.
Loading door might not be closed completely. >>> Ensure
that the loading door is properly closed.
There might be a power outage. >>> Press the Start/Stand-
by button to start the program.
Water tank may be full. >>> Empty the water tank.
Clothes have shrunk, hardened or spoiled.
A program not suitable with the laundry type might have
been used. >>> Check the maintenance labels on the
clothes and select a program suitable for the clothes.
The lighting inside the drying machine does not turn on. (For
models with a lamp)
Drying machine might not be turned on with the On/Off
button or program might not be selected for machines
without an On/Off button. >>> Make sure that the drying
machine is turned on.
Lamp might be malfunctioning. >>> Contact Authorized
Service to replace the lamp.
Filter cleaning warning symbol/LED is on/flashing.
Fibre filter might not be cleaned. >>> Clean the filter.
The filter slot might be clogged with lints. >>> Clean the
filter slot.
A layer of fluff might have accumulated clogging up the lint
filter pores. >>> Wash the filter with warm water.
The condenser might be blocked. >>> Wash the
condenser.
Water drips from the loading door.
Fibres might have gathered on the inner sides of the loading
door and the loading door gasket. >>> Clean the inner
surfaces of the loading door and the loading door gasket
surfaces.
Loading door opens by itself.
Loading door might not be closed completely. >>> Push the
loading door until the closing sound is heard.
Water tank warning symbol / led is on/flashing.
Water tank may be full. >>> Empty the water tank.
Water discharge hose might have collapsed. >>> If the
product is connected directly to the water drain check the
water discharge hose.
Steam symbol is flashing.(For the products with a steam
function)
Steam tank may be empty => Fill the steam tank with
distilled or condensed water.
Steam programs do not start (For the products with a steam
function)
Steam tank may be empty, steam tank warning icon may
light up on the screen => Fill the steam tank until the steam
icon goes off.
Wrinkles are not removed with wrinkle removing program.
(For the products with a steam function)
Excess amount of laundry may have been placed => Place
specified amount of laundry.
Steam application time may be selected in low level =>
Choose a program with high amount of steam.
After completion of the program, the laundry may have
stayed in the machine for a long time => Take the laundry
out as soon as the program finishes, and hang it out.
Laundry odour not lessened with the odour removal
program.(For the products with an odour removal program)
Excess amount of laundry may have been placed => Place
specified amount of laundry.
Steam application time may be selected in low level =>
Choose a program with high amount of steam.
AWARNING!
If the problem persists after following the
instructions in this section, contact your vendor
or an Authorized Service. Never try to repair your
product yourself.
CNOTE
In an event that you encounter an issue on any part
on your appliance, you can ask for a replacement
by contacting the authorized service with the
appliance model number.
Operating the appliance with non-authentic parts
may lead the appliance to malfunction.
Manufacturer and distributor are not liable for
malfunctions resulting from using non-authentic
parts.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DC 72301 BX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DC 72301 BX in the language / languages: English, German as an attachment in your email.

The manual is 3,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DC 72301 BX

BEKO DC 72301 BX User Manual - Dutch, French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info