684593
23
Zoom out
Zoom in
Previous page
1/32
Next page
Dryer / User Manual
23 / EN
Operating the product
6.6 Auxiliary function
Low temperature
This function allows for drying at lower
temperatures and therefore saves energy.
Warning LED will light up when you select
the function.
C
You must use this function when
you dry your synthetic or delicate
laundry.
6.7 Warning indicators
C
Warning indicators may differ
according to the model of your
dryer.
Filter cleaning
A warning light will turn on to remind filter
cleaning after the programme finishes.
C
If the filter cleaning warning light
lights up continuously, please
refer to, “Suggested solutions for
problems”.
Water tank
A
Warning LED will light up at the
end of the programme or when
the tank is full with water. The
machine stops operating when
this warning LED lights up during
a programme running. To restart
the machine, please drain the
water in the water tank. Press
“Start/Pause/Cancel” button
to start the programme after
you have emptied the water
tank. The warning LED goes off
and the programme resumes
operating.
6.8 Starting the programme
1. Press “Start/Pause/Cancel” button to
start the programme.
2. Light of the “Start/Pause/Cancel”
button will turn on to indicate that the
programme has started.
Timer follow-up indicator
One of the LEDs is on as far as programme
runs and shows the approximate remaining
time.
6.9 Changing the programme
after the programme has
started
You can use this feature to dry your laundry
in a different programme after your machine
has started to run.
For example;
Press and hold the “Start/Pause/Cancel”
button for about 3 seconds to select “90”
minutes programme instead of “60” minutes
program.
Select the “90” minutes programme by
rotating the program knob.
Press “Start/Pause/Cancel” button to start
the programme.
C
The program which is selected
first will go on even if the
programme selection button is
moved and another programme
mode is selected while the
machine is operating. You must
cancel the ongoing programme
in order to change the drying
programme. (See, Ending the
programme through canceling)
Adding/removing laundry in standby
mode
In order to add or take out laundry after the
start-up of the programme;
1. Press the “Start/Pause/Cancel” button
to switch the machine to “Pause” mode.
Drying process will stop.
2. Open the door at Pause position and close
it again after adding or taking out laundry.
3. Press “Start/Pause/Cancel” button to start
the programme.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DC 7112 W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DC 7112 W in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DC 7112 W

BEKO DC 7112 W User Manual - Dutch - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info