676966
9
Zoom out
Zoom in
Previous page
1/132
Next page
9 / 130 ENHood / User Manual
Closing Element
The space between the edge of the hood and
the rear wall can be closed by applying the
element 20 provided, using the screws supplied
for this purpose.
3.2 Connection
3.2.1 Ducted Version Air Exhaust
System
When installing the ducted version, connect the
hood to the chimney using either a flexible or rigid
pipe ø 150 or 120 mm, the choice of which is left
to the installer.
To install a ø 120 mm air exhaust connection,
insert the reducer flange 9 on the hood body
outlet.
Fix the pipe in position using sufficient pipe
clamps (not supplied).
Remove possible charcoal filters.
3.2.2 Recirculation Version Air Outlet
Cut a hole ø 125 mm in any shelf that may be
positioned over the hood.
Insert the reducer flange 9 on the hood body
outlet.
Connect the flange to the outlet on the shelf
over the hood by using a flexible or rigid pipe
ø120 mm.
Fix the pipe in position using sufficient pipe
clamps (not supplied).
Fix the air outlet grid 8 on the recirculation air
outlet by using the 2 screws 12e (2,9 x 9,5)
provided.
Ensure that the activated charcoal filters have
been inserted.
3.2.3 Electrical Connection
Connect the hood to the mains through a two-
pole switch having a contact gap of at least
3mm.
When opening the sliding carriage for the first
time after installing the hood, pull it out briskly
until it clicks.
3 Installation
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO CTB6250B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO CTB6250B in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 18,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info