Manual BEKO BP112H (page 15 of 340) (English, German, Dutch, French, Italian, Portuguese)

761461

Zoom out

Zoom in

1/340

Local Air-conditioner / User Manual 15 / 340 EN

1.8 Checks to the refrigeration equipment

Where electrical components are being changed, they shall be fit

for the purpose and to the correct specification. At all times the

manufacturer’s maintenance and service guidelines shall be followed.

If in doubt consult the manufacturer’s technical department for

assistance. The following checks shall be applied to installations using

flammable refrigerants: the charge size is in accordance with the

room size within which the refrigerant containing parts are installed;

the ventilation machinery and outlets are operating adequately and

are not obstructed; if an indirect refrigerating circuit is being used,

the secondary circuit shall be checked for the presence of refrigerant;

marking to the equipment continues to be visible and legible. Markings

and signs that are illegible shall be corrected; refrigeration pipe or

components are installed in a position where they are unlikely to be

exposed to any substance which may corrode refrigerant containing

components, unless the components are constructed of materials

which are inherently resistant to being corroded or are suitably

protected against being so corroded.

1.9 Checks to electrical devices

Repair and maintenance to electrical components shall include

initial safety checks and component inspection procedures. If afault

exists that could compromise safety, then no electrical supply

shall be connected to the circuit until it is satisfactorily dealt with.

If the fault cannot be corrected immediately but it is necessary to

continue operation, an adequate temporary solution shall be used.

This shall be reported to the owner of the equipment so all parties

are advised.

1 Safety awareness

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO BP112H in the language / languages: English, German, Dutch, French, Italian, Portuguese as an attachment in your email.

The manual is 18,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO BP112H Manual

Product: