761460

BEKO BP112C Manual

51
Zoom out
Zoom in
Previous page
1/340
Next page
Local Air-conditioner / User Manual 51 / 340 EN
Troubles Possble causes Suggested remedes
1.
Unit does not
start when
pressing on/off
button
-
Water full indicator lamp blinks,
and water tank is full. Dump the water out of the water tank.
-
Room temperature is higher than
the setting temperature.
(Heating mode)
Reset the temperature
-
Room temperature is lower than
the setting temperature.
(Cooling mode)
Reset the temperature
2.
Not cool enough
-
The doors or windows are not
closed.
Make sure all the windows and doors
are closed.
-
There are heat sources inside the
room. Remove the heat sources if possible
-
Exhaust air hose is not connected
or blocked. Connect or clean the exhaust air hose.
-
Temperature setting is too high. Reset the temperature
-
Air inlet is blocked. Clean the air inlet.
3.
Noisy
-
The ground is not level or not flat
enough
Place the unit on a flat, level ground if
possible
-
The sound comes from the flowing
of the refrigerant inside the air
conditioner
It is normal.
4.
E0 Code Room temperature sensor failed Replace room temperature sensor (the
unit can also work without replacement.)
5.
E1 Code Condenser temperature sensor failed Replace condenser temperature
sensor
6.
E2 Code Water tank full when cooling Take off rubber stopper and empty
the water.
7.
E3 Code Evaporator temperature sensor failed Replace evaporator temperature sensor
8.
E4 Code Water tank full when heating Please empty the water tank.
C
Note: The real products may look different.
10 Troubleshootng
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO BP112C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO BP112C in the language / languages: English, German, Dutch, French, Italian, Portuguese as an attachment in your email.

The manual is 18,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info