Manual BEKO BP112C (page 26 of 340) (English, German, Dutch, French, Italian, Portuguese)

761460

Zoom out

Zoom in

1/340

26 / 340 EN Local Air-conditioner / User Manual

c) Repair

•

Local equipment shall be repaired outside or in a workshop

specially equipped for servicing units with flammable refrigerants.

•

Ensure sufficient ventilation at the repair place.

•

Be aware that malfunction of the equipment may be caused by

refrigerant loss and a refrigerant leak is possible.

•

Discharge capacitors in a way that won’t cause any spark.

•

When brazing is required, the following procedures shall be

carried out in the right order:

Remove the refrigerant. If the recovery is not required by national

regulations, drain the refrigerant to the outside. Take care that

the drained refrigerant will not cause any danger. In doubt, one

person should guard the outlet. Take special care that drained

refrigerant will not float back into the building.

Evacuate the refrigerant circuit.

Purge the refrigerant circuit with nitrogen for 5 min.

Evacuate again.

Remove parts to be replaced by cutting, not by flame.

Purge the braze point with nitrogen during the brazing procedure.

Carry out a leak test before charging with refrigerant.

•

Reassemble sealed enclosures accurately. If seals are worn,

replace them.

•

Check safety equipment before putting into service.

1 Safety awareness

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BEKO BP112C in the language / languages: English, German, Dutch, French, Italian, Portuguese as an attachment in your email.

The manual is 18,16 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BEKO BP112C Manual

Product: