816996
35
Zoom out
Zoom in
Previous page
1/45
Next page
35/EN
Floor illumination
Warning to show that machine is in
washing phase
(depends on the model)
Your machine reflects a light to the floor
during the washing process. This light turns
off after the washing process is complete.
Floor illumination is activated
automatically when the washing
programme starts and remains lit until
the end of the programme.
Floor illumination cannot be cancelled
by the user.
EverClean Function
(depends on the model)
When you activate this function, your micro-
filter is cleaned with a special system at the
end of the washing cycle and is ready for
the next use. With this cleaning process,
the cleaning period of the micro-filter can
be increased from 2 weeks to 3 months
and the washing performance is improved.
In order to use this function effectively, it is
recommended to use it in every washing
cycle.
There are two options for this function,
"Enabled" and "Disabled".
To change the filter cleaning setting:
1. When the door is closed, after
turning on your machine with the On/
Off button, enter the Sub-Menu by
pressing the On-Off and P2 program
buttons simultaneously for 3 seconds.
2. Press the P2 program button, and go to
the "F:" position on the display. At the
same time, the filter cleaning function
indicator is activated on the display.
3. Select "F:0" or "F:1" position using
the P3 button. Filter cleaning function
is enabled at "F: 1" position, and is
disabled at "F: 0" position.
4. Exit the settings menu by pressing
the On/Off button for 3 seconds. Your
settings will be saved automatically.
IonGuard function
(depends on the model)
IonGuard function is enabled at regular
intervals and prevents the formation of
bad odours due to putrefaction. If this
function is selected, it will be activated
while the product is turned off and the
IonGuard indicator on the panel will flash.
A ventilation noise can be heard, this
is normal. Until the function selection is
disabled, system is automatically activated
intermittently.
Starting of the program
Close the door to start your machine after
selecting the program and additional
functions.
Machine softens the water as per
the hardness of the mains water. The
washing period may change while the
program is being executed depending
on the room temperature, mains water
temperature and the amount of dishes.
Care to avoid opening of the door
while the machine is being operated.
Be careful as steam may come
out when you open the door of the
machine.
To ensure that the water remaining
on the dishes and inside the machine
is completely drained and that the
water softener is removed after rinsing
operation, your machine resumes
operation at drying cycle after keeping
silent for a while.
Cancelling (Resetting) the
program
With the door closed, press the Start/
Pause/Cancel button for 3 seconds. Display
shows 0:01 after a 3 - 2 - 1 countdown.
Wait for discharge to complete. The
discharge is completed within 2 minutes
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO BDUN15O30X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO BDUN15O30X in the language / languages: English as an attachment in your email.

The manual is 14.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO BDUN15O30X

BEKO BDUN15O30X User Manual - German - 43 pages

BEKO BDUN15O30X User Manual - Dutch - 48 pages

BEKO BDUN15O30X User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info