797179
16
Zoom out
Zoom in
Previous page
1/48
Next page
16/EN
Detergent
You can use powder, tablet and liquid/gel
detergent in the machine.
Only use the detergents produced
particularly for use with dishwashers in
the machine. We recommend you not
to use detergents that contain chlorine
and phosphate as they are harmful for
the environment.
Your dishwasher is equipped with an
Automatic Liquid/Gel Detergent Dosing
System.
Thanks to this system, the amount of rinse
aid and liquid/gel detergent required for the
selected washing programme is adjusted
automatically.
Please read the information given
in section “Operating the Product” to
activate or deactivate the Automatic
Liquid/Gel Detergent Dosing
adjustment.
When the Automatic Liquid/Gel
Detergent function is enabled, the
Automatic Liquid/Gel Detergent
indicator on the panel will light up if
there is liquid/gel detergent in the
detergent box. If there is little or no
detergent in the detergent box, the
indicator will flash.
When the Automatic Liquid/Gel
Detergent indicator starts to flash,
there is enough detergent for at least 5
washing cycles.
Factory settings of the Automatic
Liquid/Gel Detergent Dosing
System are based on the detergent
amount recommended by detergent
manufacturers.
You can proceed to the Settings menu
to change the Automatic Liquid/Gel
Detergent Dosing setting according
to your habits, or according to the
recommendations by the detergent
1. First take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A).
3. Add 1 litre of water to salt reservoir of
your machine only in initial use.
4. Add salt to the salt compartment. To
speed up dissolution rate of salt in
water, stir it with a spoon.
You can put about 2 kg of softening
salt into the salt reservoir.
5. Replace the lid and tighten it when the
reservoir is full.
You need to add salt right before
starting the machine. Thus, the
overflowing salty water will be flushed
immediately, preventing the risk
of corrosion in machine. In cases
where you would not start washing
immediately, run your machine empty
in the shortest program.
Since different salt brands in the
market have different particle sizes and
since the water hardness may vary,
dissolution of the salt in water may
take a couple of hours. Therefore, Salt
Indicator remains on for a while after
adding salt into the machine.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO BDIS38120Q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO BDIS38120Q in the language / languages: English as an attachment in your email.

The manual is 12.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO BDIS38120Q

BEKO BDIS38120Q User Manual - German - 43 pages

BEKO BDIS38120Q User Manual - Dutch - 47 pages

BEKO BDIS38120Q User Manual - French - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info