797060

BEKO BDFN36530 Manual

33
Zoom out
Zoom in
Previous page
1/44
Next page
33/EN
Super Rinse Function
(Depends on model)
Depending on the type of the detergent
used, if a detergent dissolving issue is
encountered it will remove the resulting
stains from the dishes and enables the
optimum rinsing performance.
Selecting this function extends the
program period.
The program may be used as Pot
Washing or Bottle Washing functions
as per your selection.
EverClean Filter
(depends on the model)
With this function, your micro filter will be
cleaned by a special system at the end of
washing cycle and it is made ready for use
for the next usage of the machine. This
cleaning process increases the cleaning
period of the micro filter from 2 weeks to
3 months and thus boosts the washing
performance. Employing this function in
every washing cycle is recommended in
order to get the most out of it.
Delay function
(depends on the model)
If there is an economic electricity tariff in
your area, you can use the delay function
to wash your dishes at respective hours.
You may delay the start time of the selected
program up to 24 hours.
Child (Key) Lock Function
(Depends on the Model)
You may prevent other persons from
affecting and changing the program flow
and delay time during the operation of the
machine.
To activate the child lock:
1. Press and hold the P4 and P5 program
buttons simultaneously to enable the
Child (Key) Lock function, when the
door is closed.
2. Child (Key) Lock indicator is illuminated
and the key lock shall be activated.
IonGuard function
(depends on the model)
IonGuard function is enabled at regular
intervals and prevents the formation of
bad odours due to putrefaction. If this
function is selected, it will be activated
while the product is turned off and the
IonGuard indicator on the panel will flash.
A ventilation noise can be heard, this
is normal. Until the function selection is
disabled, system is automatically activated
intermittently.
1. With the door closed, press the delay
button after selecting the washing
program and other additional functions.
2. When you press the Delay button, “1h”
is displayed on the Display Information
Line and the Delay indicator starts
flashing.
3. Set the time you want by pressing the
delay button. Each time you press
the button, the time increases in 1
hour increments up to 24 hours. Long
pressing the delay button triggers
continuous hour increment.
4. Press the Start/Pause/Cancel key.
Program will start automatically when
the delay period is over.
Changing the settings with the delay
function is enabled
While the delay function is active, you
cannot make changes in the washing
program, additional functions or delay time.
Once the program has started, the
program and auxiliary functions cannot
be set/changed.
To cancel the delay function:
With the door closed, press the Program
Selection/Program Cancellation button
for 3 seconds. When the delay function
is disabled, you will return to the program
selection mode.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO BDFN36530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO BDFN36530 in the language / languages: English as an attachment in your email.

The manual is 14.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO BDFN36530

BEKO BDFN36530 User Manual - German - 48 pages

BEKO BDFN36530 User Manual - Dutch - 47 pages

BEKO BDFN36530 User Manual - French - 47 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info