816873

BEKO BBIM17300BMPEF Manual

34
Zoom out
Zoom in
Previous page
1/84
Next page
EN / 34
9. When the symbol disappears on the
display, remove the remaining deposits
with vinegar water.
10.Touch any key to stop the audible warn-
ing.
After the pyrolysis function is com-
pleted, the door lock will be active
until the oven cools to the appropri-
ate temperature. If you want to
cook at this time, "H” will appear
on the display and cooking will not
be possible.
Self cleaning function with high temperat-
ure – Eco pyrolysis (It varies depending
on the product model. It may not be
available on your product.)
üIf your oven is not very dirty, we recom-
mend using the "Pyrolysis - economy
mode" function. "Pyrolysis - economy
mode" function takes less time than
the Pyrolysis" function. If the oven is
very dirty, the "Pyrolysis - economy
mode" function may not be sufficient.
In this case, clean it by the "Pyrolysis"
function.
1. Remove all accessories inside the oven.
In the models with wire shelves, remem-
ber to remove the wire shelf.
2. Before starting the cleaning, clean the
outer surfaces of the oven and the food
residues inside the oven with soapy
cloth.
3. Select the “pyrolysis” (Pyrolysis) func-
tion.
ðThe “P2:00” and “Pro” message is
shown on the display for approx. 2
seconds and then the P2:00 mes-
sage starts to flash.
4. Tap the or key.
ðThe “ECO” message is shown on
the display for approx. 2 seconds
and then the P1:30 message starts
to flash.
5. Turn the temperature knob to the
highest "max" (maximum) temperature.
6. When the pyrolysis function is started,
P1:30 lights up and starts counting
down. The pyrolysis time (1.5 hours) is
shown on the display. This time is un-
changeable.
7. When the oven reaches a certain tem-
perature after the pyrolysis process
starts, the symbol appears on the
timer display and the oven door cannot
be opened. Do not force the handle to
unlock the door until the cleaning pro-
cess is finished and the lock symbol dis-
appears from the display.
8. When the cleaning process is finished,
"End" appears on the display.
9. After "End" appears on the display, turn
the function and temperature knobs to 0
(off) position to end the process.
10.When the symbol disappears on the
display, remove the remaining deposits
with vinegar water.
11.Touch any key to stop the audible warn-
ing.
After the pyrolysis function is com-
pleted, the door lock will be active
until the oven cools to the appropri-
ate temperature. If you want to
cook at this time, "H” will appear
on the display and cooking will not
be possible.
7.7 Cleaning the Oven Door
You can remove your oven door and door
glasses to clean them. How to remove the
doors and windows is explained in the sec-
tions "Removing the oven door” and "Re-
moving the inner glasses of the door".
After removing the door inner glasses,
clean them using a dishwashing detergent,
warm water and a soft cloth or sponge and
… 34 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO BBIM17300BMPEF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO BBIM17300BMPEF in the language / languages: English, German as an attachment in your email.

The manual is 2.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info