816576
34
Zoom out
Zoom in
Previous page
1/44
Next page
EN / 34
You can touch the “Appliances” tab in the
HomeWhiz application to view appliances
paired with your account. Following the in-
stallation of the application, HomeWhiz func-
tion enables the washing machine to send
you instant notifications via your smart appli-
ance.
In order to use the HomeWhiz func-
tion, the application must be in-
stalled on your smart appliance, and
your washing machine must be
paired with your smart appliance via
Bluetooth. If your washing machine
is not paired to your smart device it
works as an appliance which does
not have a HomeWhiz feature.
Your product will operate as paired
to your smart device via bluetooth.
The controls made by means of the
application will be enabled through
this pairing. Therefore the bluetooth
signal strength between the appli-
ance and the smart device must be
adequate.
Please visit www.homewhiz.com to see
the Android and iOS versions sup-
ported by the HomeWhiz applica-
tion.
All the safety measures described in
"GENERAL SAFETY INSTRUC-
TIONS" section of your user manual
apply to the remote operation
through HomeWhiz function as well
6.15.1 HomeWhiz Setup
In order run the application, a connection
must be established between your appliance
and HomeWhiz application. In order to es-
tablish this connection, you must follow the
steps given below for the setup process on
both your appliance and the HomeWhiz Ap-
plication.
a. If you are adding a device for the first
time, touch “Appliances” tab on the
HomeWhiz Application. Select “ADD AP-
PLIANCE” (touch here for setting up a
new appliance) button in the upper right
corner. Perform the setup by following
both the steps below and the steps in the
HomeWhiz Application.
b. To start the setup, make sure that your
machine is turned off. Press and hold the
Temperature button and the Remote
Control Function button simultaneously
for 3 seconds to switch your machine to
HomeWhiz setup mode.
c. When the appliance is in HomeWhiz
setup mode, you will see an animation on
the display and the bluetooth icon will
flash until your machine gets paired with
smart device. Only programme knob will
be active in this mode. Other buttons will
be inactive.
d. Follow the instructions in display of
HomeWhiz application.
e. Wait until the installation is complete.
Once the setup is completed, give your
washing machine a name. Now, you can
tap and see the product you have added
in the HomeWhiz Aplication.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO B5WT594108W2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO B5WT594108W2 in the language / languages: English as an attachment in your email.

The manual is 1.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO B5WT594108W2

BEKO B5WT594108W2 User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info